OSHA has inspected Suburban Manufacturing LLC 7 times in Minnesota since 1995.
The latest one began on Jul 22, 2025 as a planned inspection, in Monticello.
Those inspections ended with 4 citation items: 2 serious and 2 other-than-serious.
Penalties were first proposed at $2,050 and now stand at $1,470, 28% lower after settlements or reviews.
How that compares: the median penalty per cited inspection for manufacturing employers since 2015 is $3,600, and Suburban Manufacturing LLC averages $525 (2 cited inspections).
Suburban Manufacturing LLC also files yearly injury logs with OSHA, summarized below.
Citation items per year, by inspection date.
Minnesota · latest 90 days of OSHA records
371employers cited
11 of them in the same industry
Get notified the morning OSHA posts each new citation in Minnesota: the employer, the site address, the rules broken and the penalty.
Checking a subcontractor, a client or your own company? Watch Suburban Manufacturing LLC and get notified the morning OSHA posts a new citation for it.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2025, the Monticello site logged 5 recordable injuries or illnesses among about 78 workers: 6.5 per 100 full-time workers, against a median of 2.7 for its industry. Those cases cost 2 days away from work.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Suburban Manufacturing, LLC
Monticello · 2025
78
5
1
6.5
2.7
Suburban Manufacturing, Inc.
Monticello · 2018
66
3
0
4.6
2.4
Included with any plan: 1 more yearly log from these sites, back to 2016, with each site's average rate over its latest three years. Already a subscriber? Sign in.
(4) Energy control procedure. (i) Procedures shall be developed, documented and utilized for the control of potentially hazardous energy when employees are engaged in the activities covered by this section.
29 CFR 1910.219 · Belts, pulleys and power-transmission parts
29 CFR 1910.219(d)(1)
(d) Pulleys—(1) Guarding. Pulleys, any parts of which are seven (7) feet or less from the floor or working platform, shall be guarded in accordance with the standards specified in paragraphs (m) and (o) of this section. Pulleys serving as balance wheels (e.g., punch presses) on which the point of contact between belt and pulley is more than six feet six inches (6 ft. 6 in.) from the floor or platform may be guarded with a disk covering the spokes.
29 CFR 1910.303 · Electrical equipment, general requirements
29 CFR 1910.303(b)(1)
(b) Examination, installation, and use of equipment—(1) Examination. Electric equipment shall be free from recognized hazards that are likely to cause death or serious physical harm to employees. Safety of equipment shall be determined using the following considerations:
Alert subscribers get notified of each newly cited employer in Minnesota the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.