OSHA SearchOSHA records by employer

Suncrest LLC: OSHA inspections and violations

Waynesville, North Carolina · Sawmills · NAICS 321113

1inspections
8citation items
$13,500current penalties
May 4, 2023last inspection

OSHA has inspected Suncrest LLC once in North Carolina.

The inspection began on May 4, 2023 as a planned inspection, in Waynesville.

That inspection ended with 8 citation items: 8 serious.

Penalties were first proposed at $20,700 and now stand at $13,500, 35% lower after settlements or reviews.

Belts, pulleys and power-transmission parts comes up most often in these citations: 3 items under 1910.219.

How that compares: the median penalty per cited inspection for manufacturing employers since 2015 is $4,500, and Suncrest LLC averages $13,500 (1 cited inspection).

Suncrest LLC: OSHA citation items per year, 2023 to 2023
Citation items per year, by inspection date.

Want to know if OSHA cites Suncrest LLC again? Add it to a watchlist and we will email you the morning the citation shows up.

Watch this company

Inspection history

Inspection 346679004 OPENED MAY 4, 2023Closed

Planned · Partial · Safety · 8 employees at the site · Closed Aug 21, 2024

4595 Jonathan Creek Rd., Waynesville, NC 28785 · Sawmills · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
29 CFR 1910.28(b)(1)(i) · Fall protection in general industry
 Serious$2,900$1,900Jun 5, 2023Final
Citation 1, item 2
29 CFR 1910.146(c)(4) · Permit-required confined spaces
 Serious$2,900$1,900Jun 5, 2023Final
Citation 1, item 3
29 CFR 1910.147(c)(1) · Lockout/tagout
 Serious$2,900$1,900Jun 5, 2023Final
Citation 1, item 4
29 CFR 1910.212(a)(1) · Machine guarding
 Serious$2,900$1,900Jun 5, 2023Final
Citation 1, item 5
29 CFR 1910.212(a)(3)(ii) · Machine guarding
 Serious$2,900$1,900Jun 5, 2023Final
Citation 1, item 6
29 CFR 1910.219(c)(2)(i) · Belts, pulleys and power-transmission parts
 Serious$2,000$1,300Jun 5, 2023Final
Citation 1, item 7
29 CFR 1910.219(c)(4)(i) · Belts, pulleys and power-transmission parts
 Serious$1,300$800Jun 5, 2023Final
Citation 1, item 8
29 CFR 1910.219(f)(3) · Belts, pulleys and power-transmission parts
 Serious$2,900$1,900Jun 5, 2023Final

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1910.146 · Permit-required confined spaces

29 CFR 1910.146(c)(4)

(4) If the employer decides that its employees will enter permit spaces, the employer shall develop and implement a written permit space program that complies with this section. The written program shall be available for inspection by employees and their authorized representatives.

29 CFR 1910.147 · Lockout/tagout

29 CFR 1910.147(c)(1)

(c) General—(1) Energy control program. The employer shall establish a program consisting of energy control procedures, employee training and periodic inspections to ensure that before any employee performs any servicing or maintenance on a machine or equipment where the unexpected energizing, start up or release of stored energy could occur and cause injury, the machine or equipment shall be isolated from the energy source, and rendered inoperative.

29 CFR 1910.212 · Machine guarding

29 CFR 1910.212(a)(1)

(a) Machine guarding—(1) Types of guarding. One or more methods of machine guarding shall be provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks. Examples of guarding methods are—barrier guards, two-hand tripping devices, electronic safety devices, etc.

29 CFR 1910.219 · Belts, pulleys and power-transmission parts

29 CFR 1910.28 · Fall protection in general industry

Other sawmills employers in North Carolina

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.