OSHA SearchOSHA records by employer

Sunstar Americas, Inc.: OSHA inspections and violations

Schaumburg, Illinois · Broom, Brush, and Mop Manufacturing · NAICS 339994

2inspections
3citation items
$10,774current penalties
May 11, 2021last inspection

Since 2016, OSHA inspectors have visited Sunstar Americas, Inc. in Illinois 2 times.

The most recent inspection opened on May 11, 2021 to monitor an earlier case, in Schaumburg.

In all, OSHA issued 3 citation items: 3 serious.

The penalties, $10,774 in total, stand where OSHA first set them.

The rule cited most here is 1910.147 (lockout/tagout), 3 times.

Among manufacturing employers, the typical cited inspection since 2015 ends with a $3,600 penalty. Sunstar Americas, Inc. averages $10,774 across 1 cited inspection.

Sunstar Americas, Inc. also files yearly injury logs with OSHA, summarized below.

It reported 1 severe injury to OSHA since 2015.

Sunstar Americas, Inc.: OSHA citation items per year, 2016 to 2021
Citation items per year, by inspection date.

Illinois · latest 90 days of OSHA records

416employers cited

Get notified the morning OSHA posts each new citation in Illinois: the employer, the site address, the rules broken and the penalty.

See who gets cited next

Latest cited in Illinois

Checking a subcontractor, a client or your own company? Watch Sunstar Americas, Inc. and get notified the morning OSHA posts a new citation for it.

Watch this company

Inspection history

Inspection 345302756 OPENED MAY 11, 2021Closed

Monitoring · Partial · Safety · 400 employees at the site · Closed May 11, 2021

301 East Central Road, Schaumburg, IL 60194 · Broom, Brush, and Mop Manufacturing · OSHA's record · Phone and website on Google Maps

No citations from this inspection.

Inspection 341812832 OPENED OCT 4, 2016Closed

Complaint · Partial · Safety · 450 employees at the site · Closed Apr 7, 2017

301 East Central Road, Schaumburg, IL 60194 · Broom, Brush, and Mop Manufacturing · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1a
29 CFR 1910.147(c)(4)(i) · Lockout/tagout
Serious$6,157$6,157Mar 9, 2017Final
Citation 1, item 1b
29 CFR 1910.147(d) · Lockout/tagout
Serious$0$0Mar 9, 2017Final
Citation 1, item 2
29 CFR 1910.147(c)(7)(i) · Lockout/tagout
Serious$4,617$4,617Mar 9, 2017Final

Injury and illness logs

From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.

In 2025, the Schaumburg site logged 3 recordable injuries or illnesses among about 456 workers: 0.6 per 100 full-time workers, against a median of 2.5 for its industry. Those cases cost 30 days away from work.

Site and yearWorkersCasesDays-away casesRateIndustry median
Sunstar Americas, Inc.
Schaumburg · 2025
456 320.62.5

Included with any plan: 9 more yearly logs from these sites, back to 2016, with each site's average rate over its latest three years. Already a subscriber? Sign in.

See plans

Severe injury reports

Employers must report any work-related amputation, in-patient hospitalization or loss of an eye to OSHA within 24 hours. 1 report on file.

May 19, 2020, Schaumburg: Amputation · amputations · finger(s), fingernail(s), n.e.c.

An employee was trying to open the sealer bar on a piece of bagging equipment, which had closed in the down position due to low air pressure. The sealer bar closed on the employee's right index finger, causing a partial fingertip amputation (halfway down the nail, with no bone loss).

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1910.147 · Lockout/tagout

29 CFR 1910.147(c)(4)(i)

(4) Energy control procedure. (i) Procedures shall be developed, documented and utilized for the control of potentially hazardous energy when employees are engaged in the activities covered by this section.

29 CFR 1910.147(c)(7)(i)

(7) Training and communication. (i) The employer shall provide training to ensure that the purpose and function of the energy control program are understood by employees and that the knowledge and skills required for the safe application, usage, and removal of the energy controls are acquired by employees. The training shall include the following:

29 CFR 1910.147(d)

(d) Application of control. The established procedures for the application of energy control (the lockout or tagout procedures) shall cover the following elements and actions and shall be done in the following sequence:

Other broom, brush, and mop manufacturing employers in Illinois

Alert subscribers get notified of each newly cited employer in Illinois the morning it is posted. See the alert plans.

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.