OSHA has inspected Surmeier & Surmeier, Inc 3 times in Illinois since 2014.
The latest one began on Dec 4, 2017 after a complaint, in Mascoutah.
Those inspections ended with 6 citation items: 4 serious and 2 other-than-serious.
Penalties were first proposed at $21,198 and now stand at $9,531, 55% lower after settlements or reviews.
Grinders and abrasive wheels comes up most often in these citations: 2 items under 1910.215.
How that compares: the median penalty per cited inspection for construction employers since 2015 is $3,080, and Surmeier & Surmeier, Inc averages $7,931 (1 cited inspection).
Surmeier & Surmeier, Inc also files yearly injury logs with OSHA, summarized below.
Citation items per year, by inspection date.
Illinois · latest 90 days of OSHA records
426employers cited
5 of them in the same industry
Get notified the morning OSHA posts each new citation in Illinois: the employer, the site address, the rules broken and the penalty.
Complaint · Partial · Health · 30 employees at the site · Closed May 11, 2018
339 South 6th St, Mascoutah, IL 62258 · Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance · OSHA's record · Phone and website on Google Maps
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2025, the Mascoutah site logged 0 recordable injuries or illnesses among about 28 workers: 0.0 per 100 full-time workers, against a median of 0.1 for its industry.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Surmeier & Surmeier, Inc.
Mascoutah · 2025
28
0
0
0.0
0.1
Surmeier & Surmeier Inc
Mascoutah · 2021
33
2
1
6.0
0.1
Included with any plan: 6 more yearly logs from these sites, back to 2018, with each site's average rate over its latest three years. Already a subscriber? Sign in.
(c) Where the eyes or body of any person may be exposed to injurious corrosive materials, suitable facilities for quick drenching or flushing of the eyes and body shall be provided within the work area for immediate emergency use.
(4) Work rests. On offhand grinding machines, work rests shall be used to support the work. They shall be of rigid construction and designed to be adjustable to compensate for wheel wear. Work rests shall be kept adjusted closely to the wheel with a maximum opening of one-eighth inch to prevent the work from being jammed between the wheel and the rest, which may cause wheel breakage. The work rest shall be securely clamped after each adjustment. The adjustment shall not be made with the wheel in motion.
29 CFR 1910.215(b)(9)
(9) Exposure adjustment. Safety guards of the types described in subparagraphs (3) and (4) of this paragraph, where the operator stands in front of the opening, shall be constructed so that the peripheral protecting member can be adjusted to the constantly decreasing diameter of the wheel. The maximum angular exposure above the horizontal plane of the wheel spindle as specified in paragraphs (b) (3) and (4) of this section shall never be exceeded, and the distance between the wheel periphery and the adjustable tongue or the end of the peripheral member at the top shall never exceed one-fourth inch. (See Figures O-18, O-19, O-20, O-21, O-22, and O-23.)
Alert subscribers get notified of each newly cited employer in Illinois the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.