Tac Manufacturing Inc: OSHA inspections and violations
Jackson, Michigan · Motor Vehicle Steering and Suspension Components (except Spring) Manufacturing · NAICS 336330
6inspections
7citation items
$6,800current penalties
Apr 7, 2026last inspection
Since 1993, OSHA inspectors have visited Tac Manufacturing Inc in Michigan 6 times.
The most recent inspection opened on Apr 7, 2026 after a complaint, in Jackson.
In all, OSHA issued 7 citation items: 3 serious and 4 other-than-serious.
The proposed penalties came to $13,600; today they stand at $6,800, 50% less.
The rule cited most here is 1910.147 (lockout/tagout), 4 times.
Among manufacturing employers, the typical cited inspection since 2015 ends with a $3,600 penalty. Tac Manufacturing Inc averages $2,267 across 3 cited inspections.
Tac Manufacturing Inc also files yearly injury logs with OSHA, summarized below.
The Wage and Hour Division has 1 case on it since 2015, with $0 in back wages owed to workers.
Citation items per year, by inspection date.
Michigan · latest 90 days of OSHA records
647employers cited
Get notified the morning OSHA posts each new citation in Michigan: the employer, the site address, the rules broken and the penalty.
Incident on Mar 27, 2017: Employee strikes planer blades and partially amputates two f
At 1:45 p.m. on March 27, 2017, an employee was feeding the plates and boards into the single head planer when the wood created a jam. The employee lowered the table down but did not shut off power to the machine or lock the machine before reaching her right hand into the machine to clear the jam. The employee partially amputated her right middle and ring fingers when they struck the single head planer blades.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2025, the Jackson site logged 16 recordable injuries or illnesses among about 822 workers: 1.8 per 100 full-time workers, against a median of 2.7 for its industry. Those cases cost 44 days away from work.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
TAC Manufacturing Inc.
Jackson · 2025
822
16
6
1.8
2.7
TAC Manufacturing Inc
Jackson · 2025
822
17
7
1.9
2.7
Included with any plan: 9 more yearly logs from these sites, back to 2016, with each site's average rate over its latest three years. Already a subscriber? Sign in.
(4) Energy control procedure. (i) Procedures shall be developed, documented and utilized for the control of potentially hazardous energy when employees are engaged in the activities covered by this section.
29 CFR 1910.147(c)(4)(ii)
(ii) The procedures shall clearly and specifically outline the scope, purpose, authorization, rules, and techniques to be utilized for the control of hazardous energy, and the means to enforce compliance including, but not limited to, the following:
29 CFR 1910.147(c)(5)(ii)
(ii) Lockout devices and tagout devices shall be singularly identified; shall be the only devices(s) used for controlling energy; shall not be used for other purposes; and shall meet the following requirements:
Alert subscribers get notified of each newly cited employer in Michigan the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.