Sparta, Tennessee · Other Aluminum Rolling, Drawing, and Extruding · NAICS 331318
1inspections
5citation items
$7,500current penalties
Jan 26, 2023last inspection
OSHA has inspected Taco Metals, LLC once in Tennessee.
The inspection began on Jan 26, 2023 as a planned inspection, in Sparta.
That inspection ended with 5 citation items: 4 serious and 1 other-than-serious.
Penalties were first proposed at $7,500 and still stand at $7,500.
Grinders and abrasive wheels comes up most often in these citations: 2 items under 1910.215.
How that compares: the median penalty per cited inspection for manufacturing employers since 2015 is $3,600, and Taco Metals, LLC averages $7,500 (1 cited inspection).
Taco Metals, LLC also files yearly injury logs with OSHA, summarized below.
Citation items per year, by inspection date.
Tennessee · latest 90 days of OSHA records
344employers cited
Get notified the morning OSHA posts each new citation in Tennessee: the employer, the site address, the rules broken and the penalty.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2025, the Sparta site logged 2 recordable injuries or illnesses among about 88 workers: 2.4 per 100 full-time workers, against a median of 2.4 for its industry.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Taco Metals, LLC.
Sparta · 2025
88
2
0
2.4
2.4
Sparta Facility
Sparta · 2024
98
5
3
5.8
2.9
Sparta TACO Metals
Sparta · 2023
84
2
1
2.4
2.7
Taco Metals Inc - Sparta TN
Sparta · 2019
72
1
0
1.5
2.4
Included with any plan: 2 more yearly logs from these sites, back to 2019, with each site's average rate over its latest three years. Already a subscriber? Sign in.
(a) Machine guarding—(1) Types of guarding. One or more methods of machine guarding shall be provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks. Examples of guarding methods are—barrier guards, two-hand tripping devices, electronic safety devices, etc.
(4) Work rests. On offhand grinding machines, work rests shall be used to support the work. They shall be of rigid construction and designed to be adjustable to compensate for wheel wear. Work rests shall be kept adjusted closely to the wheel with a maximum opening of one-eighth inch to prevent the work from being jammed between the wheel and the rest, which may cause wheel breakage. The work rest shall be securely clamped after each adjustment. The adjustment shall not be made with the wheel in motion.
29 CFR 1910.215(b)(9)
(9) Exposure adjustment. Safety guards of the types described in subparagraphs (3) and (4) of this paragraph, where the operator stands in front of the opening, shall be constructed so that the peripheral protecting member can be adjusted to the constantly decreasing diameter of the wheel. The maximum angular exposure above the horizontal plane of the wheel spindle as specified in paragraphs (b) (3) and (4) of this section shall never be exceeded, and the distance between the wheel periphery and the adjustable tongue or the end of the peripheral member at the top shall never exceed one-fourth inch. (See Figures O-18, O-19, O-20, O-21, O-22, and O-23.)
Alert subscribers get notified of each newly cited employer in Tennessee the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.