OSHA SearchOSHA records by employer

Technetics Group Oxford, Inc.: OSHA inspections and violations

Oxford, Massachusetts · All Other Miscellaneous Fabricated Metal Product Manufacturing · NAICS 332999

1inspections
3citation items
$16,525current penalties
Oct 5, 2017last inspection

OSHA has inspected Technetics Group Oxford, Inc. once in Massachusetts.

The inspection began on Oct 5, 2017 on a referral, in Oxford.

That inspection ended with 3 citation items: 3 serious.

Penalties were first proposed at $12,675 and still stand at $16,525.

Lockout/tagout comes up most often in these citations: 2 items under 1910.147.

How that compares: the median penalty per cited inspection for manufacturing employers since 2015 is $3,600, and Technetics Group Oxford, Inc. averages $16,525 (1 cited inspection).

It reported 1 severe injury to OSHA since 2015.

Technetics Group Oxford, Inc.: OSHA citation items per year, 2017 to 2017
Citation items per year, by inspection date.

Massachusetts · latest 90 days of OSHA records

247employers cited

Get notified the morning OSHA posts each new citation in Massachusetts: the employer, the site address, the rules broken and the penalty.

See who gets cited next

Latest cited in Massachusetts

Checking a subcontractor, a client or your own company? Watch Technetics Group Oxford, Inc. and get notified the morning OSHA posts a new citation for it.

Watch this company

Inspection history

Inspection 342683661 OPENED OCT 5, 2017Closed

Referral · Partial · Safety · 100 employees at the site · Closed Aug 22, 2019

10 Old Webster Rd, Oxford, MA 01540 · All Other Miscellaneous Fabricated Metal Product Manufacturing · OSHA's record · Phone and website on Google Maps

Incident on Sep 30, 2017: Employee is struck by falling board and amputates thumb

At 7:00 a.m. on September 30, 2017, an employee was loading dies into the universal die set. The employee was caught by a board that was holding up the top of the die set when it was dislodged and struck the employee's thumb The employee amputated his thumb and was hospitalized.

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 2a
29 CFR 1910.147(c)(4)(i) · Lockout/tagout
Serious$12,675$12,675Dec 5, 2017Final
Citation 1, item 2b
29 CFR 1910.147(d)(3) · Lockout/tagout
Serious$0$0Dec 5, 2017Final
Citation 1, item 3b
29 CFR 1910.215(b)(9) · Grinders and abrasive wheels
Serious$0$3,850Dec 5, 2017Final

Severe injury reports

Employers must report any work-related amputation, in-patient hospitalization or loss of an eye to OSHA within 24 hours. 1 report on file.

Sep 30, 2017, Oxford: Amputation · amputations · finger(s), fingernail(s), unspecified

An employee was changing the die on a four-post press that was being supported by a block when his elbow knocked out the block. The top of the die dropped and crushed his left thumb, resulting in a partial thumb amputation.

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1910.147 · Lockout/tagout

29 CFR 1910.147(c)(4)(i)

(4) Energy control procedure. (i) Procedures shall be developed, documented and utilized for the control of potentially hazardous energy when employees are engaged in the activities covered by this section.

29 CFR 1910.147(d)(3)

(3) Machine or equipment isolation. All energy isolating devices that are needed to control the energy to the machine or equipment shall be physically located and operated in such a manner as to isolate the machine or equipment from the energy source(s).

29 CFR 1910.215 · Grinders and abrasive wheels

29 CFR 1910.215(b)(9)

(9) Exposure adjustment. Safety guards of the types described in subparagraphs (3) and (4) of this paragraph, where the operator stands in front of the opening, shall be constructed so that the peripheral protecting member can be adjusted to the constantly decreasing diameter of the wheel. The maximum angular exposure above the horizontal plane of the wheel spindle as specified in paragraphs (b) (3) and (4) of this section shall never be exceeded, and the distance between the wheel periphery and the adjustable tongue or the end of the peripheral member at the top shall never exceed one-fourth inch. (See Figures O-18, O-19, O-20, O-21, O-22, and O-23.)

Other all other miscellaneous fabricated metal product manufacturing employers in Massachusetts

Alert subscribers get notified of each newly cited employer in Massachusetts the morning it is posted. See the alert plans.

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.