Since 2017, OSHA inspectors have visited Tekni-Plex, Inc. in Georgia 3 times.
The most recent inspection opened on Mar 13, 2023 on a referral, in Lawrenceville.
In all, OSHA issued 4 citation items: 3 serious and 1 other-than-serious.
The proposed penalties came to $26,988; today they stand at $18,000, 33% less.
The rule cited most here is 1910.147 (lockout/tagout), 3 times.
Among manufacturing employers, the typical cited inspection since 2015 ends with a $4,500 penalty. Tekni-Plex, Inc. averages $9,000 across 2 cited inspections.
Tekni-Plex, Inc. also files yearly injury logs with OSHA, summarized below.
It reported 2 severe injuries to OSHA since 2015.
Citation items per year, by inspection date.
Georgia · latest 90 days of OSHA records
146employers cited
Get notified the morning OSHA posts each new citation in Georgia: the employer, the site address, the rules broken and the penalty.
OSHA records show Tekni-Plex, Inc. at 7 sites in 5 states. Together they've had 22 inspections and $86,257 in current penalties.
We match records by employer name and industry, so these sites are likely the same company, not certainly. Franchises and subsidiaries can file under one name.
Included with any plan: the site-by-site record for all 7 sites, with repeat and willful violations and citations per year for the whole company. Already a subscriber? Sign in.
Incident on Feb 25, 2020: Employee amputates fingertips when clearing press jam
At 2:30 p.m. on February 25, 2020, an employee was operating the F2 forming press, when a jam occurred. The employee hit the "E-stop" and was going to remove the jam. His supervisor did not see him and restarted the machine. The employee's hand was in the machine and was crushed. The employee suffered the amputation of two fingertips. The employee was hospitalized.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2025, the Lawrenceville site logged 2 recordable injuries or illnesses among about 125 workers: 1.4 per 100 full-time workers, against a median of 2.6 for its industry.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Tekni-plex
Lawrenceville · 2025
125
2
0
1.4
2.6
Severe injury reports
Employers must report any work-related amputation, in-patient hospitalization or loss of an eye to OSHA within 24 hours. 2 reports on file.
Feb 25, 2020, Lawrenceville: Amputation · amputations · fingertip(s)
An employee was operating the former machine and crushed three fingers on their right hand. Two fingertips were amputated.
An employee was observing a machine that was not advancing a plastic sheet correctly and jamming as a result. The employee was checking the tension of the drive belt by depressing the belt with his fingers when the machine unexpectedly advanced the sheet, causing the drive belt to move. When the drive belt moved, the employee's left index finger was caught between the belt and pulley. The…
The rules behind these citations
Current text from the Code of Federal Regulations. Some citations were issued under older wording.
(6) Periodic inspection. (i) The employer shall conduct a periodic inspection of the energy control procedure at least annually to ensure that the procedure and the requirements of this standard are being followed.
29 CFR 1910.147(c)(7)(i)(a)
(A) Each authorized employee shall receive training in the recognition of applicable hazardous energy sources, the type and magnitude of the energy available in the workplace, and the methods and means necessary for energy isolation and control.
(a) Machine guarding—(1) Types of guarding. One or more methods of machine guarding shall be provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks. Examples of guarding methods are—barrier guards, two-hand tripping devices, electronic safety devices, etc.
Other polystyrene foam product manufacturing employers in Georgia
Alert subscribers get notified of each newly cited employer in Georgia the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.