OSHA SearchOSHA records by employer

Tena Construction: OSHA inspections and violations

Las Cruces, New Mexico · Masonry Contractors · NAICS 238140

2inspections
13citation items
$7,706current penalties
Aug 16, 2022last inspection

Since 2009, OSHA inspectors have visited Tena Construction in New Mexico 2 times.

The most recent inspection opened on Aug 16, 2022 as a planned inspection, in Las Cruces.

In all, OSHA issued 13 citation items: 12 serious and 1 other-than-serious.

The proposed penalties came to $16,937; today they stand at $7,706, 55% less.

The rule cited most here is 1926.451 (scaffolds, general requirements), 11 times.

Among construction employers, the typical cited inspection since 2015 ends with a $3,079 penalty. Tena Construction averages $3,956 across 1 cited inspection.

Tena Construction: OSHA citation items per year, 2009 to 2022
Citation items per year, by inspection date.

Want to know if OSHA cites Tena Construction again? Add it to a watchlist and we will email you the morning the citation shows up.

Watch this company

Inspection history

Inspection 346151707 OPENED AUG 16, 2022Closed

Planned · Complete · Safety · 3 employees at the site · Closed Mar 24, 2023

2701 East Lohman Ave., Las Cruces, NM 88005 · Drywall and Insulation Contractors · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
29 CFR 1926.451(b)(1)(i) · Scaffolds, general requirements
 Serious$3,956$1,978Feb 10, 2023Final
Citation 1, item 2
29 CFR 1926.451(g)(1)(vii) · Scaffolds, general requirements
 Serious$3,956$1,978Feb 10, 2023Final
Citation 1, item 3
29 CFR 1926.501(b)(1) · Fall protection in construction
 Other-than-serious$5,275$0Feb 10, 2023Final

Inspection 313061152 OPENED MAR 11, 2009Closed

Referral · Complete · Safety · 8 employees at the site · Closed Oct 1, 2000

3065 N. University Avenue, Las Cruces, NM 88001 · Masonry Contractors · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1a
29 CFR 1926.451(a)(6) · Scaffolds, general requirements
 Serious$750$750May 7, 2009Closed
Citation 1, item 1b
29 CFR 1926.451(f)(3) · Scaffolds, general requirements
 Serious$0$0May 7, 2009Closed
Citation 1, item 1c
29 CFR 1926.451(f)(7) · Scaffolds, general requirements
 Serious$0$0May 7, 2009Closed
Citation 1, item 2a
29 CFR 1926.451(b)(1)(i) · Scaffolds, general requirements
 Serious$750$750May 7, 2009Closed
Citation 1, item 2b
29 CFR 1926.451(b)(5)(i) · Scaffolds, general requirements
 Serious$0$0May 7, 2009Closed
Citation 1, item 3a
29 CFR 1926.451(c)(2)(ii) · Scaffolds, general requirements
 Serious$750$750May 7, 2009Closed
Citation 1, item 3b
29 CFR 1926.451(c)(3) · Scaffolds, general requirements
 Serious$0$0May 7, 2009Closed
Citation 1, item 4c
29 CFR 1926.451(e)(1) · Scaffolds, general requirements
 Serious$750$750May 7, 2009Closed
Citation 1, item 4d
29 CFR 1926.451(g)(4)(i) · Scaffolds, general requirements
 Serious$0$0May 7, 2009Closed
Citation 1, item 5
29 CFR 1926.501(b)(1) · Fall protection in construction
 Serious$750$750May 7, 2009Closed

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1926.451 · Scaffolds, general requirements

29 CFR 1926.451(a)(6)

(6) Scaffolds shall be designed by a qualified person and shall be constructed and loaded in accordance with that design. Non-mandatory appendix A to this subpart contains examples of criteria that will enable an employer to comply with paragraph (a) of this section.

29 CFR 1926.451(b)(1)(i)

(i) Each platform unit (e.g., scaffold plank, fabricated plank, fabricated deck, or fabricated platform) shall be installed so that the space between adjacent units and the space between the platform and the uprights is no more than 1 inch (2.5 cm) wide, except where the employer can demonstrate that a wider space is necessary (for example, to fit around uprights when side brackets are used to extend the width of the platform).

29 CFR 1926.451(b)(5)(i)

(5)(i) Each end of a platform 10 feet or less in length shall not extend over its support more than 12 inches (30 cm) unless the platform is designed and installed so that the cantilevered portion of the platform is able to support employees and/or materials without tipping, or has guardrails which block employee access to the cantilevered end.

29 CFR 1926.501 · Fall protection in construction

Other masonry contractors employers in New Mexico

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.