OSHA SearchOSHA records by employer

Tight Line Construction Co.: OSHA inspections and violations

Concord, New Hampshire · Finish Carpentry Contractors · NAICS 238350

1inspections
1citation items
$2,376current penalties
Apr 24, 2017last inspection

OSHA inspectors have visited Tight Line Construction Co. in New Hampshire one time.

It opened on Apr 24, 2017 as a planned inspection, in Concord.

In all, OSHA issued 1 citation item: 1 serious.

The proposed penalties came to $6,338; today they stand at $2,376, 63% less.

Among construction employers, the typical cited inspection since 2015 ends with a $3,080 penalty. Tight Line Construction Co. averages $2,376 across 1 cited inspection.

Tight Line Construction Co.: OSHA citation items per year, 2017 to 2017
Citation items per year, by inspection date.

New Hampshire · latest 90 days of OSHA records

55employers cited

Get notified the morning OSHA posts each new citation in New Hampshire: the employer, the site address, the rules broken and the penalty.

See who gets cited next

Latest cited in New Hampshire

Checking a subcontractor, a client or your own company? Watch Tight Line Construction Co. and get notified the morning OSHA posts a new citation for it.

Watch this company

Inspection history

Inspection 342272697 OPENED APR 24, 2017Closed

Planned · Complete · Safety · 30 employees at the site · Closed Sep 6, 2017

281 North State Street, Concord, NH 03301 · Finish Carpentry Contractors · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
29 CFR 1926.304(i)(1) · Woodworking tools
Serious$6,338$2,376May 23, 2017Final

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1926.304 · Woodworking tools

29 CFR 1926.304(i)(1)

(i) Hand-fed ripsaws. (1) Each circular hand-fed ripsaw shall be guarded by a hood which shall completely enclose that portion of the saw above the table and that portion of the saw above the material being cut. The hood and mounting shall be arranged so that the hood will automatically adjust itself to the thickness of and remain in contact with the material being cut but it shall not offer any considerable resistance to insertion of material to saw or to passage of the material being sawed. The hood shall be made of adequate strength to resist blows and strains incidental to reasonable operation, adjusting, and handling, and shall be so designed as to protect the operator from flying splinters and broken saw teeth. It shall be made of material that is soft enough so that it will be unlikely to cause tooth breakage. The hood shall be so mounted as to insure that its operation will be po

Other finish carpentry contractors employers in New Hampshire

Alert subscribers get notified of each newly cited employer in New Hampshire the morning it is posted. See the alert plans.

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.