TMG Performance Products LLC: OSHA inspections and violations
Berea, Ohio · Other Motor Vehicle Parts Manufacturing · NAICS 336390
3inspections
7citation items
$47,607current penalties
Jul 11, 2025last inspection
Since 2022, OSHA inspectors have visited TMG Performance Products LLC in Ohio 3 times.
The most recent inspection opened on Jul 11, 2025 after a complaint, in Berea.
In all, OSHA issued 7 citation items: 6 serious and 1 other-than-serious.
The proposed penalties came to $71,199; today they stand at $47,607, 33% less.
The rule cited most here is 1910.212 (machine guarding), 3 times.
Among manufacturing employers, the typical cited inspection since 2015 ends with a $3,600 penalty. TMG Performance Products LLC averages $15,869 across 3 cited inspections.
TMG Performance Products LLC also files yearly injury logs with OSHA, summarized below.
It reported 1 severe injury to OSHA since 2015.
Citation items per year, by inspection date.
Ohio · latest 90 days of OSHA records
260employers cited
2 of them in the same industry
Get notified the morning OSHA posts each new citation in Ohio: the employer, the site address, the rules broken and the penalty.
Checking a subcontractor, a client or your own company? Watch TMG Performance Products LLC and get notified the morning OSHA posts a new citation for it.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2025, the Berea site logged 1 recordable injury or illness among about 89 workers: 1.2 per 100 full-time workers, against a median of 2.7 for its industry.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
TMG Performance Products
Berea · 2025
89
1
0
1.2
2.7
TMG Performance Products, LLC
Berea · 2021
115
4
4
3.3
2.7
Included with any plan: 6 more yearly logs from these sites, back to 2018, with each site's average rate over its latest three years. Already a subscriber? Sign in.
Employers must report any work-related amputation, in-patient hospitalization or loss of an eye to OSHA within 24 hours. 1 report on file.
Jan 13, 2022, Berea: Hospitalization · electrocutions, electric shocks · body systems
An employee was installing an ethernet cord in a bending machine's control panel. The employee suffered a 120-volt electrical shock from the machine's electrical cabinet.
The rules behind these citations
Current text from the Code of Federal Regulations. Some citations were issued under older wording.
(c) General—(1) Energy control program. The employer shall establish a program consisting of energy control procedures, employee training and periodic inspections to ensure that before any employee performs any servicing or maintenance on a machine or equipment where the unexpected energizing, start up or release of stored energy could occur and cause injury, the machine or equipment shall be isolated from the energy source, and rendered inoperative.
29 CFR 1910.147(c)(6)(i)
(6) Periodic inspection. (i) The employer shall conduct a periodic inspection of the energy control procedure at least annually to ensure that the procedure and the requirements of this standard are being followed.
29 CFR 1910.147(c)(6)(i)(c)
(C) Where lockout is used for energy control, the periodic inspection shall include a review, between the inspector and each authorized employee, of that employee's responsibilities under the energy control procedure being inspected.
Alert subscribers get notified of each newly cited employer in Ohio the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.