OSHA SearchOSHA records by employer

TNT Electric: OSHA inspections and violations

Smithville, Missouri · Electrical Contractors and Other Wiring Installation Contractors · NAICS 238210

1inspections
3citation items
$4,857current penalties
Oct 6, 2020last inspection

OSHA inspectors have visited TNT Electric in Missouri one time.

It opened on Oct 6, 2020 as a planned inspection, in Smithville.

In all, OSHA issued 3 citation items: 3 serious.

The proposed penalties came to $8,096; today they stand at $4,857, 40% less.

The rule cited most here is 1926.1053 (ladders in construction), 2 times.

Among construction employers, the typical cited inspection since 2015 ends with a $3,079 penalty. TNT Electric averages $4,857 across 1 cited inspection.

TNT Electric: OSHA citation items per year, 2020 to 2020
Citation items per year, by inspection date.

Want to know if OSHA cites TNT Electric again? Add it to a watchlist and we will email you the morning the citation shows up.

Watch this company

Inspection history

Inspection 344966510 OPENED OCT 6, 2020Closed

Planned · Complete · Safety · 1 employee at the site · Closed Nov 29, 2021

166 N. 169 Hwy, Smithville, MO 64089 · Electrical Contractors and Other Wiring Installation Contractors · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
29 CFR 1926.501(b)(1) · Fall protection in construction
 Serious$4,048$2,429Nov 18, 2020Final
Citation 1, item 2a
29 CFR 1926.1053(a)(8) · Ladders in construction
 Serious$4,048$2,428Nov 18, 2020Final
Citation 1, item 2b
29 CFR 1926.1053(b)(1) · Ladders in construction
 Serious$0$0Nov 18, 2020Final

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1926.1053 · Ladders in construction

29 CFR 1926.1053(a)(8)

(8) A metal spreader or locking device shall be provided on each stepladder to hold the front and back sections in an open position when the ladder is being used.

29 CFR 1926.1053(b)(1)

(1) When portable ladders are used for access to an upper landing surface, the ladder side rails shall extend at least 3 feet (.9 m) above the upper landing surface to which the ladder is used to gain access; or, when such an extension is not possible because of the ladder's length, then the ladder shall be secured at its top to a rigid support that will not deflect, and a grasping device, such as a grabrail, shall be provided to assist employees in mounting and dismounting the ladder. In no case shall the extension be such that ladder deflection under a load would, by itself, cause the ladder to slip off its support.

29 CFR 1926.501 · Fall protection in construction

29 CFR 1926.501(b)(1)

(b)(1) Unprotected sides and edges. Each employee on a walking/working surface (horizontal and vertical surface) with an unprotected side or edge which is 6 feet (1.8 m) or more above a lower level shall be protected from falling by the use of guardrail systems, safety net systems, or personal fall arrest systems.

Other electrical contractors and other wiring installation contractors employers in Missouri

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.