OSHA SearchOSHA records by employer

Top Finish Carpentry, LLC: OSHA inspections and violations

Fort Dodge, Iowa · Finish Carpentry Contractors · NAICS 238350

1inspections
3citation items
$1,327current penalties
Jun 24, 2021last inspection

OSHA has inspected Top Finish Carpentry, LLC once in Iowa.

The inspection began on Jun 24, 2021, in Fort Dodge.

That inspection ended with 3 citation items: 3 serious.

Penalties were first proposed at $1,327 and still stand at $1,327.

Woodworking tools comes up most often in these citations: 2 items under 1926.304.

How that compares: the median penalty per cited inspection for construction employers since 2015 is $3,080, and Top Finish Carpentry, LLC averages $1,327 (1 cited inspection).

Top Finish Carpentry, LLC: OSHA citation items per year, 2021 to 2021
Citation items per year, by inspection date.

Iowa · latest 90 days of OSHA records

64employers cited

Get notified the morning OSHA posts each new citation in Iowa: the employer, the site address, the rules broken and the penalty.

See who gets cited next

Latest cited in Iowa

Checking a subcontractor, a client or your own company? Watch Top Finish Carpentry, LLC and get notified the morning OSHA posts a new citation for it.

Watch this company

Inspection history

Inspection 345407860 OPENED JUN 24, 2021Closed

Unprogrammed other · Complete · Safety · 2 employees at the site · Closed Sep 21, 2022

2905 Dodge Drive, Fort Dodge, IA 50501 · Finish Carpentry Contractors · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
29 CFR 1926.304(f) · Woodworking tools
Serious$379$379Sep 2, 2021Final
Citation 1, item 2
29 CFR 1926.304(i)(1) · Woodworking tools
Serious$474$474Sep 2, 2021Final
Citation 1, item 3
29 CFR 1926.404(b)(1)(i) · Ground-fault protection on job sites
Serious$474$474Sep 2, 2021Final

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1926.304 · Woodworking tools

29 CFR 1926.304(f)

(f) Other requirements. All woodworking tools and machinery shall meet other applicable requirements of American National Standards Institute, 01.1-1961, Safety Code for Woodworking Machinery.

29 CFR 1926.304(i)(1)

(i) Hand-fed ripsaws. (1) Each circular hand-fed ripsaw shall be guarded by a hood which shall completely enclose that portion of the saw above the table and that portion of the saw above the material being cut. The hood and mounting shall be arranged so that the hood will automatically adjust itself to the thickness of and remain in contact with the material being cut but it shall not offer any considerable resistance to insertion of material to saw or to passage of the material being sawed. The hood shall be made of adequate strength to resist blows and strains incidental to reasonable operation, adjusting, and handling, and shall be so designed as to protect the operator from flying splinters and broken saw teeth. It shall be made of material that is soft enough so that it will be unlikely to cause tooth breakage. The hood shall be so mounted as to insure that its operation will be po

29 CFR 1926.404 · Ground-fault protection on job sites

29 CFR 1926.404(b)(1)(i)

(b) Branch circuits—(1) Ground-fault protection—(i) General. The employer shall use either ground fault circuit interrupters as specified in paragraph (b)(1)(ii) of this section or an assured equipment grounding conductor program as specified in paragraph (b)(1)(iii) of this section to protect employees on construction sites. These requirements are in addition to any other requirements for equipment grounding conductors.

Other finish carpentry contractors employers in Iowa

Alert subscribers get notified of each newly cited employer in Iowa the morning it is posted. See the alert plans.

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.