OSHA SearchOSHA records by employer

Tower General Construction Corp.: OSHA inspections and violations

Richmond Hills, New York · Masonry Contractors · NAICS 238140

3inspections
8citation items
$12,000current penalties
May 12, 2022last inspection

OSHA has inspected Tower General Construction Corp. 3 times in New York since 1996.

The latest one began on May 12, 2022 on a referral, in Spring Valley; the case is still open.

Those inspections ended with 8 citation items: 7 serious and 1 other-than-serious.

Penalties were first proposed at $17,412 and now stand at $12,000, 31% lower after settlements or reviews.

Scaffolds, general requirements comes up most often in these citations: 3 items under 1926.451.

How that compares: the median penalty per cited inspection for construction employers since 2015 is $3,080, and Tower General Construction Corp. averages $9,000 (1 cited inspection).

Tower General Construction Corp.: OSHA citation items per year, 1996 to 2022
Citation items per year, by inspection date.

New York · latest 90 days of OSHA records

359employers cited

6 of them in the same industry

Get notified the morning OSHA posts each new citation in New York: the employer, the site address, the rules broken and the penalty.

See who gets cited next

Latest cited in New York

Checking a subcontractor, a client or your own company? Watch Tower General Construction Corp. and get notified the morning OSHA posts a new citation for it.

Watch this company

Inspection history

Inspection 345979116 OPENED MAY 12, 2022Open

Referral · Partial · Safety · 8 employees at the site · Open

24 W Funston Ave., Spring Valley, NY 10977 · Masonry Contractors · OSHA's record · Phone and website on Google Maps

No citations from this inspection so far.

Inspection 343199972 OPENED JUN 1, 2018Closed

Planned · Partial · Safety · 3 employees at the site · Closed Jan 29, 2021

850 40th Street, Brooklyn, NY 11232 · Masonry Contractors · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
29 CFR 1926.451(b)(2)(i) · Scaffolds, general requirements
Serious$3,880$2,527Nov 15, 2018Final
Citation 1, item 2
29 CFR 1926.451(g)(1)(i) · Scaffolds, general requirements
Serious$3,880$2,527Nov 15, 2018Final
Citation 1, item 3
29 CFR 1926.501(b)(1) · Fall protection in construction
Serious$3,880$2,527Nov 15, 2018Final
Citation 1, item 4
29 CFR 1926.1053(b)(1) · Ladders in construction
Serious$2,772$1,419Nov 15, 2018Final

Inspection 300594066 OPENED NOV 6, 1996Closed

Referral · Complete · Safety · 3 employees at the site · Closed May 15, 2000

87-86 116th Street, Richmond Hills, NY 11434 · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
29 CFR 1926.404(b)(1)(i) · Ground-fault protection on job sites
Serious$600$600Dec 13, 1996Closed
Citation 1, item 2
29 CFR 1926.405(a)(2)(iii) · Job-site wiring
Serious$600$600Dec 13, 1996Closed
Citation 1, item 3
29 CFR 1926.451(i)(8) · Scaffolds, general requirements
Serious$1,500$1,500Dec 13, 1996Closed
Citation 2, item 1
29 CFR 1926.300(b)(1) · Tools—Hand and Power: general requirements
Other-than-serious$300$300Dec 13, 1996Closed

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1926.1053 · Ladders in construction

29 CFR 1926.1053(b)(1)

(1) When portable ladders are used for access to an upper landing surface, the ladder side rails shall extend at least 3 feet (.9 m) above the upper landing surface to which the ladder is used to gain access; or, when such an extension is not possible because of the ladder's length, then the ladder shall be secured at its top to a rigid support that will not deflect, and a grasping device, such as a grabrail, shall be provided to assist employees in mounting and dismounting the ladder. In no case shall the extension be such that ladder deflection under a load would, by itself, cause the ladder to slip off its support.

29 CFR 1926.300 · Tools—Hand and Power: general requirements

29 CFR 1926.300(b)(1)

(b) Guarding. (1) When power operated tools are designed to accommodate guards, they shall be equipped with such guards when in use.

29 CFR 1926.404 · Ground-fault protection on job sites

29 CFR 1926.404(b)(1)(i)

(b) Branch circuits—(1) Ground-fault protection—(i) General. The employer shall use either ground fault circuit interrupters as specified in paragraph (b)(1)(ii) of this section or an assured equipment grounding conductor program as specified in paragraph (b)(1)(iii) of this section to protect employees on construction sites. These requirements are in addition to any other requirements for equipment grounding conductors.

29 CFR 1926.405 · Job-site wiring

29 CFR 1926.451 · Scaffolds, general requirements

29 CFR 1926.501 · Fall protection in construction

Other masonry contractors employers in New York

Alert subscribers get notified of each newly cited employer in New York the morning it is posted. See the alert plans.

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.