Trans Pro Pak, Inc.: OSHA inspections and violations
Galax, Virginia · Corrugated and Solid Fiber Box Manufacturing · NAICS 322211
4inspections
17citation items
$53,318current penalties
Aug 13, 2025last inspection
OSHA has inspected Trans Pro Pak, Inc. 4 times in Virginia since 2019.
The latest one began on Aug 13, 2025 after a complaint, in Galax.
Those inspections ended with 17 citation items: 12 serious, 1 repeat and 4 other-than-serious.
Penalties were first proposed at $70,074 and now stand at $53,318, 24% lower after settlements or reviews.
Lockout/tagout comes up most often in these citations: 9 items under 1910.147.
How that compares: the median penalty per cited inspection for manufacturing employers since 2015 is $4,500, and Trans Pro Pak, Inc. averages $13,330 (4 cited inspections).
Trans Pro Pak, Inc. also files yearly injury logs with OSHA, summarized below.
Citation items per year, by inspection date.
Virginia · latest 90 days of OSHA records
248employers cited
Get notified the morning OSHA posts each new citation in Virginia: the employer, the site address, the rules broken and the penalty.
Incident on May 6, 2021: Employee?s finger is amputated by activated saw during machi
At 4:40 p.m. on May 6, 2021, Employee #1 was working at the tail end of a Channel Former Machine, cleaning up the last pieces of product. A coworker who had just returned from the bathroom assisted with cutting a section of product that was too short for the mechanical pushing process. As Employee #1 reached to pull the product through the saw on the Channel Former Machine, the coworker activated the saw. Employee #1's left index finger was amputated at the knuckle, and he also sustained loss of skin and tissue on the back of his left middle finger. The employee was hospitalized for treatment.
Incident on Dec 3, 2019: Employee amputates fingers in notching machine
At 11:30 a.m. on December 3, 2019, an employee was adjusting a piece of channeling in the machine for final cut. The machine was activated by the operator and caught the employee's hand in between parts. The employee had two fingers amputated and was hospitalized.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2025, the Galax site logged 0 recordable injuries or illnesses among about 27 workers: 0.0 per 100 full-time workers, against a median of 2.1 for its industry.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Trans Pro Pak Inc
Galax · 2025
27
0
0
0.0
2.1
Trans Pro Pak Inc.
Galax · 2021
22
2
1
8.8
2.1
Included with any plan: 3 more yearly logs from these sites, back to 2021, with each site's average rate over its latest three years. Already a subscriber? Sign in.
(B) An employee is required to place any part of his or her body into an area on a machine or piece of equipment where work is actually performed upon the material being processed (point of operation) or where an associated danger zone exists during a machine operating cycle.
29 CFR 1910.147(c)(4)(i)
(4) Energy control procedure. (i) Procedures shall be developed, documented and utilized for the control of potentially hazardous energy when employees are engaged in the activities covered by this section.
29 CFR 1910.147(c)(4)(ii)
(ii) The procedures shall clearly and specifically outline the scope, purpose, authorization, rules, and techniques to be utilized for the control of hazardous energy, and the means to enforce compliance including, but not limited to, the following:
Alert subscribers get notified of each newly cited employer in Virginia the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.