OSHA SearchOSHA records by employer

Tri Fab, LLC: OSHA inspections and violations

Sand Springs, Oklahoma · Prefabricated Metal Building and Component Manufacturing · NAICS 332311

1inspections
5citation items
$7,760current penalties
Jan 12, 2016last inspection

OSHA inspectors have visited Tri Fab, LLC in Oklahoma one time.

It opened on Jan 12, 2016 after a complaint, in Sand Springs.

In all, OSHA issued 5 citation items: 5 serious.

The penalties, $7,760 in total, stand where OSHA first set them.

Among manufacturing employers, the typical cited inspection since 2015 ends with a $3,600 penalty. Tri Fab, LLC averages $7,760 across 1 cited inspection.

Tri Fab, LLC: OSHA citation items per year, 2016 to 2016
Citation items per year, by inspection date.

Oklahoma · latest 90 days of OSHA records

61employers cited

Get notified the morning OSHA posts each new citation in Oklahoma: the employer, the site address, the rules broken and the penalty.

See who gets cited next

Latest cited in Oklahoma

Checking a subcontractor, a client or your own company? Watch Tri Fab, LLC and get notified the morning OSHA posts a new citation for it.

Watch this company

Inspection history

Inspection 341182517 OPENED JAN 12, 2016Closed

Complaint · Partial · Safety · 2 employees at the site · Closed Apr 17, 2018

18912 W. Highway 51, Sand Springs, OK 74063 · Prefabricated Metal Building and Component Manufacturing · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
29 CFR 1910.26(c)(2)(iv) · Portable metal ladders
 Serious$1,600$1,600Mar 15, 2016Final
Citation 1, item 2
29 CFR 1910.179(j)(3) · Overhead and gantry cranes
 Serious$1,600$1,600Mar 15, 2016Final
Citation 1, item 3 Serious$1,600$1,600Mar 15, 2016Final
Citation 1, item 4
29 CFR 1910.243(c)(1) · Guarding of portable powered tools
 Serious$1,600$1,600Mar 15, 2016Final
Citation 1, item 5
29 CFR 1910.253(b)(4)(i) · Gas welding and cutting
 Serious$1,360$1,360Mar 15, 2016Final

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1910.179 · Overhead and gantry cranes

29 CFR 1910.179(j)(3)

(3) Periodic inspection. Complete inspections of the crane shall be performed at intervals as generally defined in paragraph (j)(1)(ii)(b) of this section, depending upon its activity, severity of service, and environment, or as specifically indicated below. These inspections shall include the requirements of paragraph (j)(2) of this section and in addition, the following items. Any deficiencies such as listed shall be carefully examined and determination made as to whether they constitute a safety hazard:

29 CFR 1910.184 · Slings

29 CFR 1910.184(d)

(d) Inspections. Each day before being used, the sling and all fastenings and attachments shall be inspected for damage or defects by a competent person designated by the employer. Additional inspections shall be performed during sling use, where service conditions warrant. Damaged or defective slings shall be immediately removed from service.

29 CFR 1910.243 · Guarding of portable powered tools

29 CFR 1910.243(c)(1)

(c) Portable abrasive wheels—(1) General requirements. Abrasive wheels shall be used only on machine provided with safety guards as defined in paragraph (c) (1) through (4) of this section.

29 CFR 1910.253 · Gas welding and cutting

29 CFR 1910.26 · Portable metal ladders

Other prefabricated metal building and component manufacturing employers in Oklahoma

Alert subscribers get notified of each newly cited employer in Oklahoma the morning it is posted. See the alert plans.

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.