Since 2000, OSHA inspectors have visited Trident Seafoods Corp in Oregon 15 times.
The most recent inspection opened on Feb 10, 2017 as a planned inspection, in Newport.
In all, OSHA issued 24 citation items: 11 serious and 13 other-than-serious.
The proposed penalties came to $14,350; today they stand at $9,725, 32% less.
The rule cited most here is 1910.23 (ladders in general industry), 3 times.
Among manufacturing employers, the typical cited inspection since 2015 ends with a $4,875 penalty. Trident Seafoods Corp averages $3,008 across 2 cited inspections.
Citation items per year, by inspection date.
Oregon · latest 90 days of OSHA records
386employers cited
Get notified the morning OSHA posts each new citation in Oregon: the employer, the site address, the rules broken and the penalty.
OSHA records show Trident Seafoods Corp at 27 sites in 4 states. Together they've had 217 inspections and $804,769 in current penalties.
We match records by employer name and industry, so these sites are likely the same company, not certainly. Franchises and subsidiaries can file under one name.
Included with any plan: the site-by-site record for all 27 sites, with repeat and willful violations and citations per year for the whole company. Already a subscriber? Sign in.
(b) Compressed gases. The in-plant handling, storage, and utilization of all compressed gases in cylinders, portable tanks, rail tankcars, or motor vehicle cargo tanks shall be in accordance with Compressed Gas Association Pamphlet P-1-1965, which is incorporated by reference as specified in § 1910.6.
(1) General. The employer shall provide a medical evaluation to determine the employee's ability to use a respirator, before the employee is fit tested or required to use the respirator in the workplace. The employer may discontinue an employee's medical evaluations when the employee is no longer required to use a respirator.
(9) Exposure adjustment. Safety guards of the types described in subparagraphs (3) and (4) of this paragraph, where the operator stands in front of the opening, shall be constructed so that the peripheral protecting member can be adjusted to the constantly decreasing diameter of the wheel. The maximum angular exposure above the horizontal plane of the wheel spindle as specified in paragraphs (b) (3) and (4) of this section shall never be exceeded, and the distance between the wheel periphery and the adjustable tongue or the end of the peripheral member at the top shall never exceed one-fourth inch. (See Figures O-18, O-19, O-20, O-21, O-22, and O-23.)
29 CFR 1910.219 · Belts, pulleys and power-transmission parts
29 CFR 1910.23 · Guarding floor and wall openings and holes
Alert subscribers get notified of each newly cited employer in Oregon the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.