The inspection began on Nov 3, 2025 as a planned inspection, in Kaysville.
That inspection ended with 4 citation items: 4 serious.
Penalties were first proposed at $4,813 and now stand at $2,406, 50% lower after settlements or reviews.
Woodworking machinery comes up most often in these citations: 2 items under 1910.213.
How that compares: the median penalty per cited inspection for construction employers since 2015 is $3,080, and Trim Art LLC averages $2,406 (1 cited inspection).
Trim Art LLC also files yearly injury logs with OSHA, summarized below.
Citation items per year, by inspection date.
Utah · latest 90 days of OSHA records
70employers cited
Get notified the morning OSHA posts each new citation in Utah: the employer, the site address, the rules broken and the penalty.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2024, the Kaysville site logged 4 recordable injuries or illnesses among about 68 workers: 10.3 per 100 full-time workers, against a median of 2.3 for its industry. Those cases cost 4 days away from work.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Trim Art LLC
Kaysville · 2024
68
4
2
10.3
2.3
Trim Art LLC - Flint Meadow
Kaysville · 2023
44
4
1
9.3
2.3
The rules behind these citations
Current text from the Code of Federal Regulations. Some citations were issued under older wording.
(c) General—(1) Energy control program. The employer shall establish a program consisting of energy control procedures, employee training and periodic inspections to ensure that before any employee performs any servicing or maintenance on a machine or equipment where the unexpected energizing, start up or release of stored energy could occur and cause injury, the machine or equipment shall be isolated from the energy source, and rendered inoperative.
29 CFR 1910.147(c)(4)(i)
(4) Energy control procedure. (i) Procedures shall be developed, documented and utilized for the control of potentially hazardous energy when employees are engaged in the activities covered by this section.
(c) Hand-fed ripsaws. (1) Each circular hand-fed ripsaw shall be guarded by a hood which shall completely enclose that portion of the saw above the table and that portion of the saw above the material being cut. The hood and mounting shall be arranged so that the hood will automatically adjust itself to the thickness of and remain in contact with the material being cut but it shall not offer any considerable resistance to insertion of material to saw or to passage of the material being sawed. The hood shall be made of adequate strength to resist blows and strains incidental to reasonable operation, adjusting, and handling, and shall be so designed as to protect the operator from flying splinters and broken saw teeth. It shall be made of material that is soft enough so that it will be unlikely to cause tooth breakage. The hood shall be so mounted as to insure that its operation will be po
Other finish carpentry contractors employers in Utah
Alert subscribers get notified of each newly cited employer in Utah the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.