OSHA SearchOSHA records by employer

Triun Construction and Engineering: OSHA inspections and violations

Fort Stockton, Texas · Commercial and Institutional Building Construction · NAICS 236220

1inspections
4citation items
$10,000current penalties
Jun 25, 2026last inspection

OSHA inspectors have visited Triun Construction and Engineering in Texas one time.

It opened on Jun 25, 2026 after a complaint, in Fort Stockton and is still open.

In all, OSHA issued 4 citation items: 2 serious and 2 other-than-serious.

The proposed penalties came to $15,100; today they stand at $10,000, 34% less.

The rule cited most here is 1926.651 (excavations), 2 times.

Among construction employers, the typical cited inspection since 2015 ends with a $3,080 penalty. Triun Construction and Engineering averages $10,000 across 1 cited inspection.

Triun Construction and Engineering: OSHA citation items per year, 2026 to 2026
Citation items per year, by inspection date.

Want to know if OSHA cites Triun Construction and Engineering again? Add it to a watchlist and we will email you the morning the citation shows up.

Watch this company

Inspection history

Inspection 349017210 OPENED JUN 25, 2026Open

Complaint · Partial · Safety · 50 employees at the site · Open

7d Road, Fort Stockton, TX 79735 · Commercial and Institutional Building Construction · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
29 CFR 1926.651(c)(2) · Excavations
 Serious$6,620$4,500Jul 23, 2026Final
Citation 1, item 2
29 CFR 1926.652(a)(1) · Trench protection
 Serious$6,620$4,500Jul 23, 2026Final
Citation 2, item 1
29 CFR 1926.303(b)(1) · Abrasive wheels and tools
 Other-than-serious$930$500Jul 23, 2026Final
Citation 2, item 2
29 CFR 1926.651(k)(1) · Excavations
 Other-than-serious$930$500Jul 23, 2026Final

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1926.303 · Abrasive wheels and tools

29 CFR 1926.303(b)(1)

(b) Guarding. (1) Grinding machines shall be equipped with safety guards in conformance with the requirements of American National Standards Institute, B7.1-1970, Safety Code for the Use, Care and Protection of Abrasive Wheels, and paragraph (d) of this section.

29 CFR 1926.651 · Excavations

29 CFR 1926.651(c)(2)

(2) Means of egress from trench excavations. A stairway, ladder, ramp or other safe means of egress shall be located in trench excavations that are 4 feet (1.22 m) or more in depth so as to require no more than 25 feet (7.62 m) of lateral travel for employees.

29 CFR 1926.651(k)(1)

(k) Inspections. (1) Daily inspections of excavations, the adjacent areas, and protective systems shall be made by a competent person for evidence of a situation that could result in possible cave-ins, indications of failure of protective systems, hazardous atmospheres, or other hazardous conditions. An inspection shall be conducted by the competent person prior to the start of work and as needed throughout the shift. Inspections shall also be made after every rainstorm or other hazard increasing occurrence. These inspections are only required when employee exposure can be reasonably anticipated.

29 CFR 1926.652 · Trench protection

Other commercial and institutional building construction employers in Texas

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.