OSHA SearchOSHA records by employer

Trull Forest Products, Inc.: OSHA inspections and violations

Franklin, North Carolina · Sawmills · NAICS 321113

1inspections
5citation items
$3,900current penalties
Aug 26, 2024last inspection

OSHA inspectors have visited Trull Forest Products, Inc. in North Carolina one time.

It opened on Aug 26, 2024 as a planned inspection, in Franklin.

In all, OSHA issued 5 citation items: 5 serious.

The proposed penalties came to $5,976; today they stand at $3,900, 35% less.

The rule cited most here is 1910.219 (belts, pulleys and power-transmission parts), 4 times.

Among manufacturing employers, the typical cited inspection since 2015 ends with a $4,500 penalty. Trull Forest Products, Inc. averages $3,900 across 1 cited inspection.

Trull Forest Products, Inc.: OSHA citation items per year, 2024 to 2024
Citation items per year, by inspection date.

North Carolina · latest 90 days of OSHA records

231employers cited

Get notified the morning OSHA posts each new citation in North Carolina: the employer, the site address, the rules broken and the penalty.

See who gets cited next

Latest cited in North Carolina

Checking a subcontractor, a client or your own company? Watch Trull Forest Products, Inc. and get notified the morning OSHA posts a new citation for it.

Watch this company

Inspection history

Inspection 347714826 OPENED AUG 26, 2024Closed

Planned · Partial · Safety · 5 employees at the site · Closed Sep 29, 2026

111 Louisa Chapel Rd., Franklin, NC 28734 · Sawmills · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
29 CFR 1910.147(c)(1) · Lockout/tagout
Serious$3,226$2,090Sep 10, 2024Final
Citation 1, item 2
29 CFR 1910.219(c)(2)(i) · Belts, pulleys and power-transmission parts
Serious$750$510Sep 10, 2024Final
Citation 1, item 3a
29 CFR 1910.219(d)(1) · Belts, pulleys and power-transmission parts
Serious$1,000$650Sep 10, 2024Final
Citation 1, item 3b
29 CFR 1910.219(e)(1)(i) · Belts, pulleys and power-transmission parts
Serious$0$0Sep 10, 2024Final
Citation 1, item 4
29 CFR 1910.219(f)(3) · Belts, pulleys and power-transmission parts
Serious$1,000$650Sep 10, 2024Final

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1910.147 · Lockout/tagout

29 CFR 1910.147(c)(1)

(c) General—(1) Energy control program. The employer shall establish a program consisting of energy control procedures, employee training and periodic inspections to ensure that before any employee performs any servicing or maintenance on a machine or equipment where the unexpected energizing, start up or release of stored energy could occur and cause injury, the machine or equipment shall be isolated from the energy source, and rendered inoperative.

29 CFR 1910.219 · Belts, pulleys and power-transmission parts

29 CFR 1910.219(c)(2)(i)

(2) Guarding horizontal shafting. (i) All exposed parts of horizontal shafting seven (7) feet or less from floor or working platform, excepting runways used exclusively for oiling, or running adjustments, shall be protected by a stationary casing enclosing shafting completely or by a trough enclosing sides and top or sides and bottom of shafting as location requires.

29 CFR 1910.219(d)(1)

(d) Pulleys—(1) Guarding. Pulleys, any parts of which are seven (7) feet or less from the floor or working platform, shall be guarded in accordance with the standards specified in paragraphs (m) and (o) of this section. Pulleys serving as balance wheels (e.g., punch presses) on which the point of contact between belt and pulley is more than six feet six inches (6 ft. 6 in.) from the floor or platform may be guarded with a disk covering the spokes.

Other sawmills employers in North Carolina

Alert subscribers get notified of each newly cited employer in North Carolina the morning it is posted. See the alert plans.

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.