OSHA SearchOSHA records by employer

Tuftane Extrusion Technologies Incorporated: OSHA inspections and violations

Fall River, Massachusetts · Unlaminated Plastics Film and Sheet (except Packaging) Manufacturing · NAICS 326113

1inspections
3citation items
$7,200current penalties
Apr 29, 2015last inspection

OSHA inspectors have visited Tuftane Extrusion Technologies Incorporated in Massachusetts one time.

It opened on Apr 29, 2015 on a referral, in Fall River.

In all, OSHA issued 3 citation items: 3 serious.

The penalties, $7,200 in total, stand where OSHA first set them.

Among manufacturing employers, the typical cited inspection since 2015 ends with a $4,500 penalty. Tuftane Extrusion Technologies Incorporated averages $7,200 across 1 cited inspection.

Tuftane Extrusion Technologies Incorporated: OSHA citation items per year, 2015 to 2015
Citation items per year, by inspection date.

Massachusetts · latest 90 days of OSHA records

247employers cited

2 of them in the same industry

Get notified the morning OSHA posts each new citation in Massachusetts: the employer, the site address, the rules broken and the penalty.

See who gets cited next

Latest cited in Massachusetts

Checking a subcontractor, a client or your own company? Watch Tuftane Extrusion Technologies Incorporated and get notified the morning OSHA posts a new citation for it.

Watch this company

Inspection history

Inspection 340594977 OPENED APR 29, 2015Closed

Referral · Partial · Safety · 6 employees at the site · Closed Jun 18, 2015

96 Wordell Street, Fall River, MA 02721 · Unlaminated Plastics Film and Sheet (except Packaging) Manufacturing · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
29 CFR 1910.147(c)(4)(i) · Lockout/tagout
Serious$2,800$2,800May 6, 2015Final
Citation 1, item 2
29 CFR 1910.212(a)(1) · Machine guarding
Serious$2,800$2,800May 6, 2015Final
Citation 1, item 3
29 CFR 1910.219(d)(1) · Belts, pulleys and power-transmission parts
Serious$1,600$1,600May 6, 2015Final

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1910.147 · Lockout/tagout

29 CFR 1910.147(c)(4)(i)

(4) Energy control procedure. (i) Procedures shall be developed, documented and utilized for the control of potentially hazardous energy when employees are engaged in the activities covered by this section.

29 CFR 1910.212 · Machine guarding

29 CFR 1910.212(a)(1)

(a) Machine guarding—(1) Types of guarding. One or more methods of machine guarding shall be provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks. Examples of guarding methods are—barrier guards, two-hand tripping devices, electronic safety devices, etc.

29 CFR 1910.219 · Belts, pulleys and power-transmission parts

29 CFR 1910.219(d)(1)

(d) Pulleys—(1) Guarding. Pulleys, any parts of which are seven (7) feet or less from the floor or working platform, shall be guarded in accordance with the standards specified in paragraphs (m) and (o) of this section. Pulleys serving as balance wheels (e.g., punch presses) on which the point of contact between belt and pulley is more than six feet six inches (6 ft. 6 in.) from the floor or platform may be guarded with a disk covering the spokes.

Other unlaminated plastics film and sheet (except packaging) manufacturing employers in Massachusetts

Alert subscribers get notified of each newly cited employer in Massachusetts the morning it is posted. See the alert plans.

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.