OSHA inspectors have visited Ufp Industries, Inc in Utah one time.
It opened on Feb 13, 2020 as a planned inspection, in Magna.
In all, OSHA issued 4 citation items: 1 serious and 3 other-than-serious.
The proposed penalties came to $1,250; today they stand at $625, 50% less.
The rule cited most here is 1910.147 (lockout/tagout), 2 times.
Among manufacturing employers, the typical cited inspection since 2015 ends with a $4,500 penalty. Ufp Industries, Inc averages $625 across 1 cited inspection.
Ufp Industries, Inc also files yearly injury logs with OSHA, summarized below.
Citation items per year, by inspection date.
Utah · latest 90 days of OSHA records
67employers cited
Get notified the morning OSHA posts each new citation in Utah: the employer, the site address, the rules broken and the penalty.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2021, the Magna site logged 6 recordable injuries or illnesses among about 58 workers: 12.9 per 100 full-time workers, against a median of 4.6 for its industry.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
UFP Magna, LLC
Magna · 2021
58
6
0
12.9
4.6
Included with any plan: 1 more yearly log from these sites, back to 2020, with each site's average rate over its latest three years. Already a subscriber? Sign in.
(ii) The employer shall certify that the periodic inspections have been performed. The certification shall identify the machine or equipment on which the energy control procedure was being utilized, the date of the inspection, the employees included in the inspection, and the person performing the inspection.
29 CFR 1910.147(e)(3)
(3) Lockout or tagout devices removal. Each lockout or tagout device shall be removed from each energy isolating device by the employee who applied the device. Exception to paragraph (e)(3): When the authorized employee who applied the lockout or tagout device is not available to remove it, that device may be removed under the direction of the employer, provided that specific procedures and training for such removal have been developed, documented and incorporated into the employer's energy control program. The employer shall demonstrate that the specific procedure provides equivalent safety to the removal of the device by the authorized employee who applied it. The specific procedure shall include at least the following elements:
(a) Machine guarding—(1) Types of guarding. One or more methods of machine guarding shall be provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks. Examples of guarding methods are—barrier guards, two-hand tripping devices, electronic safety devices, etc.
Other engineered wood member (except truss) manufacturing employers in Utah
Alert subscribers get notified of each newly cited employer in Utah the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.