OSHA SearchOSHA records by employer

Ultimate Framers LLC: OSHA inspections and violations

Desoto, Texas · Framing Contractors · NAICS 238130

1inspections
4citation items
$17,282current penalties
Oct 12, 2023last inspection

Ultimate Framers LLC has one OSHA inspection on record in Texas.

OSHA opened it on Oct 12, 2023 as a planned inspection, in Desoto, and the case has not closed yet.

From that inspection OSHA issued 4 citation items: 4 serious.

OSHA proposed $17,282 in penalties and the amount has not been reduced.

For context, across all construction employers the median penalty per cited inspection since 2015 is $3,080. Ultimate Framers LLC averages $17,282 over 1 cited inspection in that time.

Ultimate Framers LLC: OSHA citation items per year, 2023 to 2023
Citation items per year, by inspection date.

Want to know if OSHA cites Ultimate Framers LLC again? Add it to a watchlist and we will email you the morning the citation shows up.

Watch this company

Inspection history

Inspection 347030348 OPENED OCT 12, 2023Open

Planned · Partial · Safety · 4 employees at the site · Open

621 Candace Dr, Desoto, TX 75115 · Framing Contractors · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
29 CFR 1926.100(a) · Hard hats in construction
 Serious$2,765$2,765Jan 25, 2024Final
Citation 1, item 2
29 CFR 1910.243(a)(1)(i) · Guarding of portable powered tools
 Serious$4,839$4,839Jan 25, 2024Final
Citation 1, item 3
29 CFR 1926.501(b)(13) · Fall protection in construction
 Serious$4,839$4,839Jan 25, 2024Final
Citation 1, item 4
29 CFR 1926.1053(b)(1) · Ladders in construction
 Serious$4,839$4,839Jan 25, 2024Final

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1910.243 · Guarding of portable powered tools

29 CFR 1910.243(a)(1)(i)

(a) Portable powered tool—(1) Portable circular saws. (i) All portable, power-driven circular saws having a blade diameter greater than 2 in. shall be equipped with guards above and below the base plate or shoe. The upper guard shall cover the saw to the depth of the teeth, except for the minimum arc required to permit the base to be tilted for bevel cuts. The lower guard shall cover the saw to the depth of the teeth, except for the minimum arc required to allow proper retraction and contact with the work. When the tool is withdrawn from the work, the lower guard shall automatically and instantly return to covering position.

29 CFR 1926.100 · Hard hats in construction

29 CFR 1926.100(a)

(a) Employees working in areas where there is a possible danger of head injury from impact, or from falling or flying objects, or from electrical shock and burns, shall be protected by protective helmets.

29 CFR 1926.1053 · Ladders in construction

29 CFR 1926.1053(b)(1)

(1) When portable ladders are used for access to an upper landing surface, the ladder side rails shall extend at least 3 feet (.9 m) above the upper landing surface to which the ladder is used to gain access; or, when such an extension is not possible because of the ladder's length, then the ladder shall be secured at its top to a rigid support that will not deflect, and a grasping device, such as a grabrail, shall be provided to assist employees in mounting and dismounting the ladder. In no case shall the extension be such that ladder deflection under a load would, by itself, cause the ladder to slip off its support.

29 CFR 1926.501 · Fall protection in construction

Other framing contractors employers in Texas

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.