OSHA SearchOSHA records by employer

Vacuum Technologies LLC: OSHA inspections and violations

Sheridan, Wyoming · Commercial and Service Industry Machinery Manufacturing · NAICS 333319

1inspections
5citation items
$21,619current penalties
Feb 6, 2019last inspection

OSHA has inspected Vacuum Technologies LLC once in Wyoming.

The inspection began on Feb 6, 2019 after a complaint, in Sheridan.

That inspection ended with 5 citation items: 4 serious and 1 other-than-serious.

Penalties were first proposed at $24,945 and now stand at $21,619, 13% lower after settlements or reviews.

How that compares: the median penalty per cited inspection for manufacturing employers since 2015 is $3,600, and Vacuum Technologies LLC averages $21,619 (1 cited inspection).

Vacuum Technologies LLC: OSHA citation items per year, 2019 to 2019
Citation items per year, by inspection date.

Wyoming · latest 90 days of OSHA records

31employers cited

Get notified the morning OSHA posts each new citation in Wyoming: the employer, the site address, the rules broken and the penalty.

See who gets cited next

Latest cited in Wyoming

Checking a subcontractor, a client or your own company? Watch Vacuum Technologies LLC and get notified the morning OSHA posts a new citation for it.

Watch this company

Inspection history

Inspection 343749610 OPENED FEB 6, 2019Closed

Complaint · Partial · Health · 182 employees at the site · Closed Jul 1, 2019

1350 Hitech Drive, Sheridan, WY 82801 · Commercial and Service Industry Machinery Manufacturing · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
29 CFR 27-11-105 (B)(VI)(A)
Serious$4,989$4,989May 30, 2019Final
Citation 1, item 2 Serious$6,652$6,652May 30, 2019Final
Citation 1, item 3
29 CFR 1910.243(c)(1) · Guarding of portable powered tools
Serious$8,315$4,989May 30, 2019Final
Citation 1, item 4
29 CFR 1910.252(b)(2)(iii) · Welding fire safety
Serious$4,989$4,989May 30, 2019Final
Citation 2, item 1
29 CFR 1910.179(j)(1)(ii) · Overhead and gantry cranes
Other-than-serious$0$0May 30, 2019Final

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1910.179 · Overhead and gantry cranes

29 CFR 1910.179(j)(1)(ii)

(ii) Inspection procedure for cranes in regular service is divided into two general classifications based upon the intervals at which inspection should be performed. The intervals in turn are dependent upon the nature of the critical components of the crane and the degree of their exposure to wear, deterioration, or malfunction. The two general classifications are herein designated as “frequent” and “periodic” with respective intervals between inspections as defined below:

29 CFR 1910.243 · Guarding of portable powered tools

29 CFR 1910.243(c)(1)

(c) Portable abrasive wheels—(1) General requirements. Abrasive wheels shall be used only on machine provided with safety guards as defined in paragraph (c) (1) through (4) of this section.

29 CFR 1910.252 · Welding fire safety

29 CFR 1910.252(b)(2)(iii)

(iii) Protection from arc welding rays. Where the work permits, the welder should be enclosed in an individual booth painted with a finish of low reflectivity such as zinc oxide (an important factor for absorbing ultraviolet radiations) and lamp black, or shall be enclosed with noncombustible screens similarly painted. Booths and screens shall permit circulation of air at floor level. Workers or other persons adjacent to the welding areas shall be protected from the rays by noncombustible or flameproof screens or shields or shall be required to wear appropriate goggles.

29 CFR 1910.95 · Noise

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.