Vermont Wireform, Inc. has one OSHA inspection on record in Vermont.
OSHA opened it on Jul 2, 2015 as a planned inspection, in Tunbridge.
From that inspection OSHA issued 3 citation items: 3 serious.
OSHA proposed $3,250 in penalties. After settlements and reviews the total is $1,950, down 40%.
For context, across all manufacturing employers the median penalty per cited inspection since 2015 is $3,600. Vermont Wireform, Inc. averages $1,950 over 1 cited inspection in that time.
Vermont Wireform, Inc. also files yearly injury logs with OSHA, summarized below.
Citation items per year, by inspection date.
Vermont · latest 90 days of OSHA records
25employers cited
Get notified the morning OSHA posts each new citation in Vermont: the employer, the site address, the rules broken and the penalty.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2024, the Tunbridge site logged 0 recordable injuries or illnesses among about 17 workers: 0.0 per 100 full-time workers, against a median of 2.5 for its industry.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Vermont Wireform Inc.
Tunbridge · 2024
17
0
0
0.0
2.5
Included with any plan: 5 more yearly logs from these sites, back to 2017, with each site's average rate over its latest three years. Already a subscriber? Sign in.
(9) Exposure adjustment. Safety guards of the types described in subparagraphs (3) and (4) of this paragraph, where the operator stands in front of the opening, shall be constructed so that the peripheral protecting member can be adjusted to the constantly decreasing diameter of the wheel. The maximum angular exposure above the horizontal plane of the wheel spindle as specified in paragraphs (b) (3) and (4) of this section shall never be exceeded, and the distance between the wheel periphery and the adjustable tongue or the end of the peripheral member at the top shall never exceed one-fourth inch. (See Figures O-18, O-19, O-20, O-21, O-22, and O-23.)
(c) Safeguarding the point of operation—(1) General requirements. (i) It shall be the responsibility of the employer to provide and insure the usage of “point of operation guards” or properly applied and adjusted point of operation devices on every operation performed on a mechanical power press. See Table O-10.
29 CFR 1910.219 · Belts, pulleys and power-transmission parts
29 CFR 1910.219(e)(3)(ii)
(ii) All guards for inclined belts shall be arranged in such a manner that a minimum clearance of seven (7) feet is maintained between belt and floor at any point outside of guard.
Other fastener, button, needle, and pin manufacturing employers in Vermont
Alert subscribers get notified of each newly cited employer in Vermont the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.