Since 2019, OSHA inspectors have visited Verso Corporation in Wisconsin 2 times.
The most recent inspection opened on Mar 1, 2020 as part of a related case, in Wisconsin Rapids.
In all, OSHA issued 3 citation items: 2 serious and 1 other-than-serious.
The proposed penalties came to $36,000; today they stand at $22,506, 37% less.
Among manufacturing employers, the typical cited inspection since 2015 ends with a $4,500 penalty. Verso Corporation averages $11,253 across 2 cited inspections.
1 inspection on this page followed a fatal incident.
Verso Corporation also files yearly injury logs with OSHA, summarized below.
It reported 4 severe injuries to OSHA since 2015.
Citation items per year, by inspection date.
Wisconsin · latest 90 days of OSHA records
223employers cited
2 of them in the same industry
Get notified the morning OSHA posts each new citation in Wisconsin: the employer, the site address, the rules broken and the penalty.
OSHA records show Verso Corporation at 3 sites in 2 states. Together they've had 4 inspections and $22,506 in current penalties.
We match records by employer name and industry, so these sites are likely the same company, not certainly. Franchises and subsidiaries can file under one name.
Included with any plan: the site-by-site record for all 3 sites, with repeat and willful violations and citations per year for the whole company. Already a subscriber? Sign in.
Incident on Feb 29, 2020 (fatal): Employee falls from building while cleaning work area and is
At 2:00 p.m. on February 29, 2020, an employee was preparing the area with a vacuum hose to pick up wood chips from the mill. The employee fell through an opening where the midrail should have been and and landed approximately 40 feet below. The employee was killed.
Incident on Dec 21, 2019: Employee is burned by steam/hot water
At 10:45 p.m. on December 21, 2019, an employee was checking the operation of a washer. The washer behind him had a pressurization event, blowing hot water/steam onto the employee's back. The employee was hospitalized to treat the burns.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2019, the Wisconsin Rapids site logged 16 recordable injuries or illnesses among about 975 workers: 1.6 per 100 full-time workers, against a median of 1.9 for its industry. Those cases cost 221 days away from work.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Verso Corporation
Wisconsin Rapids · 2019
975
16
6
1.6
1.9
Wisconsin Rapids Mill
Wisconsin Rapids · 2018
960
8
2
0.8
1.9
Included with any plan: 1 more yearly log from these sites, back to 2016, with each site's average rate over its latest three years. Already a subscriber? Sign in.
While walking across a drain grate, an employee's foot went through the drain grate into hot waste water and was burned.
Dec 21, 2019, Wisconsin Rapids: Hospitalization · heat (thermal) burns, unspecified · multiple body parts, n.e.c.
An employee was inspecting a washer when another washer sprayed him with water and hot steam, burning his back, arm, and possibly his chest. He was hospitalized.
An employee was installing a dryer felt when the pipe slid off the end of the forks and struck the employee, knocking her to the floor. She suffered injuries to her right fingers and the left side of her body.
Jan 22, 2015, Wisconsin Rapids: Hospitalization · second degree heat (thermal) burns · nonclassifiable
Employee hospitalized due to second degree burns from contact with hot product/stock.
The rules behind these citations
Current text from the Code of Federal Regulations. Some citations were issued under older wording.
(a) Machine guarding—(1) Types of guarding. One or more methods of machine guarding shall be provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks. Examples of guarding methods are—barrier guards, two-hand tripping devices, electronic safety devices, etc.
(1) Walking-working surfaces are inspected, regularly and as necessary, and maintained in a safe condition;
29 CFR 1910.29 · Fall protection systems in general industry
29 CFR 1910.29(b)(5)
(5) Midrails, screens, mesh, intermediate vertical members, solid panels, and other equivalent intermediate members are capable of withstanding, without failure, a force of at least 150 pounds (667 N) applied in any downward or outward direction at any point along the intermediate member.
Other paper (except newsprint) mills employers in Wisconsin
Alert subscribers get notified of each newly cited employer in Wisconsin the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.