Holstein, Iowa · Other Millwork (including Flooring) · NAICS 321918
2inspections
8citation items
$10,882current penalties
May 21, 2024last inspection
VT Industries has 2 OSHA inspections on record in Iowa, the first in 1986.
OSHA's last visit started on May 21, 2024 as a planned inspection, in Holstein.
Across those inspections OSHA issued 8 citation items: 5 serious and 3 other-than-serious.
OSHA proposed $21,765 in penalties. After settlements and reviews the total is $10,882, down 50%.
Most often, OSHA cited 1910.37, exit routes (3 items).
For context, across all manufacturing employers the median penalty per cited inspection since 2015 is $4,500. VT Industries averages $10,882 over 1 cited inspection in that time.
VT Industries also files yearly injury logs with OSHA, summarized below.
Citation items per year, by inspection date.
Iowa · latest 90 days of OSHA records
64employers cited
Get notified the morning OSHA posts each new citation in Iowa: the employer, the site address, the rules broken and the penalty.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2025, the Holstein site logged 14 recordable injuries or illnesses among about 618 workers: 2.2 per 100 full-time workers, against a median of 4.6 for its industry. Those cases cost 36 days away from work.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
VT Industries
Holstein · 2025
618
14
2
2.2
4.6
VTI Architectural Wood Products Holstein
Holstein · 2021
560
26
8
4.3
4.6
VT Industries Corporate
Holstein · 2020
104
1
0
0.9
0.0
Included with any plan: 9 more yearly logs from these sites, back to 2016, with each site's average rate over its latest three years. Already a subscriber? Sign in.
(a) Machine guarding—(1) Types of guarding. One or more methods of machine guarding shall be provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks. Examples of guarding methods are—barrier guards, two-hand tripping devices, electronic safety devices, etc.
(9) Exposure adjustment. Safety guards of the types described in subparagraphs (3) and (4) of this paragraph, where the operator stands in front of the opening, shall be constructed so that the peripheral protecting member can be adjusted to the constantly decreasing diameter of the wheel. The maximum angular exposure above the horizontal plane of the wheel spindle as specified in paragraphs (b) (3) and (4) of this section shall never be exceeded, and the distance between the wheel periphery and the adjustable tongue or the end of the peripheral member at the top shall never exceed one-fourth inch. (See Figures O-18, O-19, O-20, O-21, O-22, and O-23.)
29 CFR 1910.219 · Belts, pulleys and power-transmission parts
29 CFR 1910.219(c)(2)(i)
(2) Guarding horizontal shafting. (i) All exposed parts of horizontal shafting seven (7) feet or less from floor or working platform, excepting runways used exclusively for oiling, or running adjustments, shall be protected by a stationary casing enclosing shafting completely or by a trough enclosing sides and top or sides and bottom of shafting as location requires.
Alert subscribers get notified of each newly cited employer in Iowa the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.