Walker Granite Co., Inc.: OSHA inspections and violations
Elberton, Georgia · Cut Stone and Stone Product Manufacturing · NAICS 327991
3inspections
21citation items
$9,897current penalties
Feb 12, 2026last inspection
OSHA has inspected Walker Granite Co., Inc. 3 times in Georgia since 1989.
The latest one began on Feb 12, 2026 as a planned inspection, in Elberton.
Those inspections ended with 21 citation items: 17 serious and 4 other-than-serious.
Penalties were first proposed at $20,650 and now stand at $9,897, 52% lower after settlements or reviews.
Silica dust in general industry comes up most often in these citations: 6 items under 1910.1053.
How that compares: the median penalty per cited inspection for manufacturing employers since 2015 is $4,500, and Walker Granite Co., Inc. averages $8,682 (1 cited inspection).
Walker Granite Co., Inc. also files yearly injury logs with OSHA, summarized below.
It reported 1 severe injury to OSHA since 2015.
Citation items per year, by inspection date.
Georgia · latest 90 days of OSHA records
148employers cited
Get notified the morning OSHA posts each new citation in Georgia: the employer, the site address, the rules broken and the penalty.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2025, the Elberton site logged 0 recordable injuries or illnesses among about 21 workers: 0.0 per 100 full-time workers, against a median of 2.6 for its industry.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Walker Granite Company
Elberton · 2025
21
0
0
0.0
2.6
Included with any plan: 8 more yearly logs from these sites, back to 2016, with each site's average rate over its latest three years. Already a subscriber? Sign in.
An employee was using an overhead crane with slings to separate granite slabs and inserting spacer blocks between the slabs. As the employee was inserting the spacer, the sling slipped, causing the slab to close against the separator block. The employee's left index finger was crushed between the slab and spacer block, resulting in a fingertip amputation.
The rules behind these citations
Current text from the Code of Federal Regulations. Some citations were issued under older wording.
(c) Permissible exposure limit (PEL). The employer shall ensure that no employee is exposed to an airborne concentration of respirable crystalline silica in excess of 50 µg/m 3, calculated as an 8-hour TWA.
29 CFR 1910.1053(d)(3)(i)
(3) Scheduled monitoring option. (i) The employer shall perform initial monitoring to assess the 8-hour TWA exposure for each employee on the basis of one or more personal breathing zone air samples that reflect the exposures of employees on each shift, for each job classification, in each work area. Where several employees perform the same tasks on the same shift and in the same work area, the employer may sample a representative fraction of these employees in order to meet this requirement. In representative sampling, the employer shall sample the employee(s) who are expected to have the highest exposure to respirable crystalline silica.
29 CFR 1910.1053(e)(1)
(e) Regulated areas—(1) Establishment. The employer shall establish a regulated area wherever an employee's exposure to airborne concentrations of respirable crystalline silica is, or can reasonably be expected to be, in excess of the PEL.
Alert subscribers get notified of each newly cited employer in Georgia the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.