OSHA SearchOSHA records by employer

Walker Mill LLC: OSHA inspections and violations

Wales, Utah · Nonupholstered Wood Household Furniture Manufacturing · NAICS 337122

1inspections
3citation items
$750current penalties
Nov 4, 2015last inspection

OSHA has inspected Walker Mill LLC once in Utah.

The inspection began on Nov 4, 2015 as a planned inspection, in Wales.

That inspection ended with 3 citation items: 3 serious.

Penalties were first proposed at $1,500 and now stand at $750, 50% lower after settlements or reviews.

Woodworking machinery comes up most often in these citations: 3 items under 1910.213.

How that compares: the median penalty per cited inspection for manufacturing employers since 2015 is $3,600, and Walker Mill LLC averages $750 (1 cited inspection).

Walker Mill LLC: OSHA citation items per year, 2015 to 2015
Citation items per year, by inspection date.

Want to know if OSHA cites Walker Mill LLC again? Add it to a watchlist and we will email you the morning the citation shows up.

Watch this company

Inspection history

Inspection 341035228 OPENED NOV 4, 2015Closed

Planned · Partial · Safety · 2 employees at the site · Closed Feb 25, 2016

225 S State St, Wales, UT 84667 · Nonupholstered Wood Household Furniture Manufacturing · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1a
29 CFR 1910.213(c)(1) · Woodworking machinery
 Serious$1,500$750Dec 22, 2015Final
Citation 1, item 1b
29 CFR 1910.213(c)(2) · Woodworking machinery
 Serious$0$0Dec 22, 2015Final
Citation 1, item 1c
29 CFR 1910.213(c)(3) · Woodworking machinery
 Serious$0$0Dec 22, 2015Final

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1910.213 · Woodworking machinery

29 CFR 1910.213(c)(1)

(c) Hand-fed ripsaws. (1) Each circular hand-fed ripsaw shall be guarded by a hood which shall completely enclose that portion of the saw above the table and that portion of the saw above the material being cut. The hood and mounting shall be arranged so that the hood will automatically adjust itself to the thickness of and remain in contact with the material being cut but it shall not offer any considerable resistance to insertion of material to saw or to passage of the material being sawed. The hood shall be made of adequate strength to resist blows and strains incidental to reasonable operation, adjusting, and handling, and shall be so designed as to protect the operator from flying splinters and broken saw teeth. It shall be made of material that is soft enough so that it will be unlikely to cause tooth breakage. The hood shall be so mounted as to insure that its operation will be po

29 CFR 1910.213(c)(2)

(2) Each hand-fed circular ripsaw shall be furnished with a spreader to prevent material from squeezing the saw or being thrown back on the operator. The spreader shall be made of hard tempered steel, or its equivalent, and shall be thinner than the saw kerf. It shall be of sufficient width to provide adequate stiffness or rigidity to resist any reasonable side thrust or blow tending to bend or throw it out of position. The spreader shall be attached so that it will remain in true alignment with the saw even when either the saw or table is tilted. The provision of a spreader in connection with grooving, dadoing, or rabbeting is not required. On the completion of such operations, the spreader shall be immediately replaced.

29 CFR 1910.213(c)(3)

(3) Each hand-fed circular ripsaw shall be provided with nonkickback fingers or dogs so located as to oppose the thrust or tendency of the saw to pick up the material or to throw it back toward the operator. They shall be designed to provide adequate holding power for all the thicknesses of materials being cut.

Other nonupholstered wood household furniture manufacturing employers in Utah

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.