Welded Tubes, Inc.: OSHA inspections and violations
San Antonio, Texas · Iron and Steel Pipe and Tube Manufacturing from Purchased Steel · NAICS 331210
2inspections
4citation items
$2,880current penalties
Apr 28, 2015last inspection
OSHA has inspected Welded Tubes, Inc. 2 times in Texas since 2014.
The latest one began on Apr 28, 2015 on a referral, in San Antonio.
Those inspections ended with 4 citation items: 4 serious.
Penalties were first proposed at $4,800 and now stand at $2,880, 40% lower after settlements or reviews.
Lockout/tagout comes up most often in these citations: 3 items under 1910.147.
How that compares: the median penalty per cited inspection for manufacturing employers since 2015 is $3,600, and Welded Tubes, Inc. averages $2,880 (1 cited inspection).
Welded Tubes, Inc. also files yearly injury logs with OSHA, summarized below.
It reported 1 severe injury to OSHA since 2015.
Citation items per year, by inspection date.
Texas · latest 90 days of OSHA records
401employers cited
Get notified the morning OSHA posts each new citation in Texas: the employer, the site address, the rules broken and the penalty.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2017, the San Antonio site logged 9 recordable injuries or illnesses among about 30 workers: 28.8 per 100 full-time workers, against a median of 3.6 for its industry.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Welded Tubes, LLC.
San Antonio · 2017
30
9
0
28.8
3.6
Included with any plan: 1 more yearly log from these sites, back to 2016, with each site's average rate over its latest three years. Already a subscriber? Sign in.
Employers must report any work-related amputation, in-patient hospitalization or loss of an eye to OSHA within 24 hours. 1 report on file.
Apr 28, 2015, San Antonio: Amputation · amputations · fingertip(s)
An employee was in the process of putting pipe into a machine when a clamp caught his left index finger and removed his fingertip. The employee was treated at the hospital and released.
The rules behind these citations
Current text from the Code of Federal Regulations. Some citations were issued under older wording.
(c) General—(1) Energy control program. The employer shall establish a program consisting of energy control procedures, employee training and periodic inspections to ensure that before any employee performs any servicing or maintenance on a machine or equipment where the unexpected energizing, start up or release of stored energy could occur and cause injury, the machine or equipment shall be isolated from the energy source, and rendered inoperative.
29 CFR 1910.147(c)(4)(i)
(4) Energy control procedure. (i) Procedures shall be developed, documented and utilized for the control of potentially hazardous energy when employees are engaged in the activities covered by this section.
29 CFR 1910.147(c)(7)(i)
(7) Training and communication. (i) The employer shall provide training to ensure that the purpose and function of the energy control program are understood by employees and that the knowledge and skills required for the safe application, usage, and removal of the energy controls are acquired by employees. The training shall include the following:
Alert subscribers get notified of each newly cited employer in Texas the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.