Westmor Industries LLC: OSHA inspections and violations
Morris, Minnesota · Metal Tank (Heavy Gauge) Manufacturing · NAICS 332420
5inspections
11citation items
$3,710current penalties
Aug 3, 2018last inspection
Since 2005, OSHA inspectors have visited Westmor Industries LLC in Minnesota 5 times.
The most recent inspection opened on Aug 3, 2018 as a planned inspection, in Morris.
In all, OSHA issued 11 citation items: 9 serious and 2 other-than-serious.
The proposed penalties came to $8,150; today they stand at $3,710, 54% less.
The rule cited most here is 1910.252 (welding fire safety), 3 times.
Among manufacturing employers, the typical cited inspection since 2015 ends with a $3,600 penalty. Westmor Industries LLC averages $735 across 1 cited inspection.
Westmor Industries LLC also files yearly injury logs with OSHA, summarized below.
Citation items per year, by inspection date.
Minnesota · latest 90 days of OSHA records
371employers cited
2 of them in the same industry
Get notified the morning OSHA posts each new citation in Minnesota: the employer, the site address, the rules broken and the penalty.
OSHA records show Westmor Industries LLC at 3 sites in 2 states. Together they've had 7 inspections and $13,688 in current penalties.
We match records by employer name and industry, so these sites are likely the same company, not certainly. Franchises and subsidiaries can file under one name.
Included with any plan: the site-by-site record for all 3 sites, with repeat and willful violations and citations per year for the whole company. Already a subscriber? Sign in.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2025, the Morris site logged 5 recordable injuries or illnesses among about 284 workers: 1.6 per 100 full-time workers, against a median of 2.8 for its industry.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Westmor Industries
Morris · 2025
284
5
0
1.6
2.8
Westmor Industries LLC Morris
Morris · 2021
300
21
3
7.5
2.8
Included with any plan: 3 more yearly logs from these sites, back to 2021, with each site's average rate over its latest three years. Already a subscriber? Sign in.
(ii) The point of operation of machines whose operation exposes an employee to injury, shall be guarded. The guarding device shall be in conformity with any appropriate standards therefor, or, in the absence of applicable specific standards, shall be so designed and constructed as to prevent the operator from having any part of his body in the danger zone during the operating cycle.
(9) Exposure adjustment. Safety guards of the types described in subparagraphs (3) and (4) of this paragraph, where the operator stands in front of the opening, shall be constructed so that the peripheral protecting member can be adjusted to the constantly decreasing diameter of the wheel. The maximum angular exposure above the horizontal plane of the wheel spindle as specified in paragraphs (b) (3) and (4) of this section shall never be exceeded, and the distance between the wheel periphery and the adjustable tongue or the end of the peripheral member at the top shall never exceed one-fourth inch. (See Figures O-18, O-19, O-20, O-21, O-22, and O-23.)
29 CFR 1910.23 · Guarding floor and wall openings and holes
Alert subscribers get notified of each newly cited employer in Minnesota the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.