OSHA SearchOSHA records by employer

Worms Lumber - Ready Mix, Inc.: OSHA inspections and violations

New Munich, Minnesota · Other Building Material Dealers · NAICS 444190

1inspections
6citation items
$1,680current penalties
Sep 24, 2026last inspection

OSHA has inspected Worms Lumber - Ready Mix, Inc. once in Minnesota.

The inspection began on Sep 24, 2026 as a planned inspection, in New Munich.

That inspection ended with 6 citation items: 3 serious and 3 other-than-serious.

Penalties were first proposed at $2,800 and now stand at $1,680, 40% lower after settlements or reviews.

Woodworking machinery comes up most often in these citations: 3 items under 1910.213.

How that compares: the median penalty per cited inspection for retail employers since 2015 is $1,750, and Worms Lumber - Ready Mix, Inc. averages $1,680 (1 cited inspection).

Worms Lumber - Ready Mix, Inc.: OSHA citation items per year, 2026 to 2026
Citation items per year, by inspection date.

Minnesota · latest 90 days of OSHA records

380employers cited

4 of them in the same industry

Get notified the morning OSHA posts each new citation in Minnesota: the employer, the site address, the rules broken and the penalty.

See who gets cited next

Latest cited in Minnesota

Checking a subcontractor, a client or your own company? Watch Worms Lumber - Ready Mix, Inc. and get notified the morning OSHA posts a new citation for it.

Watch this company

Inspection history

Inspection 349186106 OPENED SEP 24, 2026Closed

Planned · Complete · Safety · 8 employees at the site · Closed Nov 9, 2026

535 Main St., New Munich, MN 56356 · Other Building Material Dealers · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
29 CFR 1910.213(c)(1) · Woodworking machinery
Serious$1,000$600Oct 12, 2026Final
Citation 1, item 2
29 CFR 1910.213(c)(2) · Woodworking machinery
Serious$600$360Oct 12, 2026Final
Citation 1, item 3
29 CFR 1910.213(c)(3) · Woodworking machinery
Serious$600$360Oct 12, 2026Final
Citation 2, item 1
29 CFR 1910.36(e)(1) · Exit route design
Other-than-serious$200$120Oct 12, 2026Final
Citation 2, item 2 Other-than-serious$200$120Oct 12, 2026Final
Citation 2, item 3 Other-than-serious$200$120Oct 12, 2026Final

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1910.213 · Woodworking machinery

29 CFR 1910.213(c)(1)

(c) Hand-fed ripsaws. (1) Each circular hand-fed ripsaw shall be guarded by a hood which shall completely enclose that portion of the saw above the table and that portion of the saw above the material being cut. The hood and mounting shall be arranged so that the hood will automatically adjust itself to the thickness of and remain in contact with the material being cut but it shall not offer any considerable resistance to insertion of material to saw or to passage of the material being sawed. The hood shall be made of adequate strength to resist blows and strains incidental to reasonable operation, adjusting, and handling, and shall be so designed as to protect the operator from flying splinters and broken saw teeth. It shall be made of material that is soft enough so that it will be unlikely to cause tooth breakage. The hood shall be so mounted as to insure that its operation will be po

29 CFR 1910.213(c)(2)

(2) Each hand-fed circular ripsaw shall be furnished with a spreader to prevent material from squeezing the saw or being thrown back on the operator. The spreader shall be made of hard tempered steel, or its equivalent, and shall be thinner than the saw kerf. It shall be of sufficient width to provide adequate stiffness or rigidity to resist any reasonable side thrust or blow tending to bend or throw it out of position. The spreader shall be attached so that it will remain in true alignment with the saw even when either the saw or table is tilted. The provision of a spreader in connection with grooving, dadoing, or rabbeting is not required. On the completion of such operations, the spreader shall be immediately replaced.

29 CFR 1910.213(c)(3)

(3) Each hand-fed circular ripsaw shall be provided with nonkickback fingers or dogs so located as to oppose the thrust or tendency of the saw to pick up the material or to throw it back toward the operator. They shall be designed to provide adequate holding power for all the thicknesses of materials being cut.

29 CFR 1910.36 · Exit route design

29 CFR 5205.140

29 CFR 5206.700

Other other building material dealers employers in Minnesota

Alert subscribers get notified of each newly cited employer in Minnesota the morning it is posted. See the alert plans.

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.