OSHA SearchOSHA records by employer

Wyman-Gordon Forging: OSHA inspections and violations

Cleveland, Ohio · Iron and Steel Forging · NAICS 332111

1inspections
2citation items
$25,868current penalties
Feb 14, 2018last inspection

OSHA has inspected Wyman-Gordon Forging once in Ohio.

The inspection began on Feb 14, 2018 after a complaint, in Cleveland.

That inspection ended with 2 citation items: 2 serious.

Penalties were first proposed at $25,868 and still stand at $25,868.

Lockout/tagout comes up most often in these citations: 2 items under 1910.147.

How that compares: the median penalty per cited inspection for manufacturing employers since 2015 is $3,600, and Wyman-Gordon Forging averages $25,868 (1 cited inspection).

Wyman-Gordon Forging: OSHA citation items per year, 2018 to 2018
Citation items per year, by inspection date.

Ohio · latest 90 days of OSHA records

260employers cited

Get notified the morning OSHA posts each new citation in Ohio: the employer, the site address, the rules broken and the penalty.

See who gets cited next

Latest cited in Ohio

Checking a subcontractor, a client or your own company? Watch Wyman-Gordon Forging and get notified the morning OSHA posts a new citation for it.

Watch this company

Inspection history

Inspection 342947702 OPENED FEB 14, 2018Closed

Complaint · Partial · Safety · 20,000 employees at the site · Closed Jun 4, 2018

3097 East 61st, Cleveland, OH 44127 · Iron and Steel Forging · OSHA's record · Phone and website on Google Maps

Incident on Feb 28, 2018: Employee amputates two fingers in a hot trim press

At 1:45 a.m. on February 28, 2018, Employee #1, a hammer press operator, removed the punch from the Toledo mechanically powered hot trimming press, without locking out the press. The employee began by loosening one of the two bolts on the face of the press ram that holds the punch in the ram. Employee #1 was using his left hand to work the wrench to loosening the bolts. He used his right hand to hold the punch, so it would not fall from the ram. While loosening the bolt, the employee's left elbow struck the single press control button and cycled the press. As the press cycled, two of his right fingers were caught in the point of operation, between the punch and blade, causing amputation of both fingers.

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 2
29 CFR 1910.147(c)(4)(ii) · Lockout/tagout
Serious$12,934$12,934Apr 3, 2018Final
Citation 1, item 3
29 CFR 1910.147(c)(6)(i) · Lockout/tagout
Serious$12,934$12,934Apr 3, 2018Final

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1910.147 · Lockout/tagout

29 CFR 1910.147(c)(4)(ii)

(ii) The procedures shall clearly and specifically outline the scope, purpose, authorization, rules, and techniques to be utilized for the control of hazardous energy, and the means to enforce compliance including, but not limited to, the following:

29 CFR 1910.147(c)(6)(i)

(6) Periodic inspection. (i) The employer shall conduct a periodic inspection of the energy control procedure at least annually to ensure that the procedure and the requirements of this standard are being followed.

Other iron and steel forging employers in Ohio

Alert subscribers get notified of each newly cited employer in Ohio the morning it is posted. See the alert plans.

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.