OSHA SearchOSHA records by employer

Yesco LLC: OSHA inspections and violations

Salt Lake City, Utah · Sign Manufacturing · NAICS 339950

2inspections
3citation items
$2,450current penalties
Nov 5, 2025last inspection

Since 1993, OSHA inspectors have visited Yesco LLC in Utah 2 times.

The most recent inspection opened on Nov 5, 2025 as a planned inspection, in Salt Lake City.

In all, OSHA issued 3 citation items: 3 serious.

The proposed penalties came to $4,900; today they stand at $2,450, 50% less.

The rule cited most here is 1910.213 (woodworking machinery), 3 times.

Among manufacturing employers, the typical cited inspection since 2015 ends with a $3,600 penalty. Yesco LLC averages $2,450 across 1 cited inspection.

Yesco LLC also files yearly injury logs with OSHA, summarized below.

Yesco LLC: OSHA citation items per year, 1993 to 2025
Citation items per year, by inspection date.

Want to know if OSHA cites Yesco LLC again? Add it to a watchlist and we will email you the morning the citation shows up.

Watch this company

Inspection history

Inspection 348581851 OPENED NOV 5, 2025Closed

Planned · Partial · Safety · 200 employees at the site · Closed Dec 24, 2025

1605 S Gramercy Rd, Salt Lake City, UT 84104 · Sign Manufacturing · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1a
29 CFR 1910.213(c)(1) · Woodworking machinery
 Serious$4,900$2,450Nov 18, 2025Final
Citation 1, item 1b
29 CFR 1910.213(c)(2) · Woodworking machinery
 Serious$0$0Nov 18, 2025Final
Citation 1, item 1c
29 CFR 1910.213(c)(3) · Woodworking machinery
 Serious$0$0Nov 18, 2025Final

Inspection 105618680 OPENED APR 21, 1993Closed

Planned · Complete · Safety · 200 employees at the site · Closed May 12, 1993

700 South 300 West, Salt Lake City, UT 84114 · OSHA's record · Phone and website on Google Maps

No citations from this inspection.

Injury and illness logs

From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.

In 2025, the Salt Lake City site logged 7 recordable injuries or illnesses among about 189 workers: 4.9 per 100 full-time workers, against a median of 2.5 for its industry. Those cases cost 29 days away from work.

Site and yearWorkersCasesDays-away casesRateIndustry median
Yesco LLC
Salt Lake City · 2025
189 714.92.5
YESCO Outdoor Media
Salt Lake City · 2023
32 000.02.5

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1910.213 · Woodworking machinery

29 CFR 1910.213(c)(1)

(c) Hand-fed ripsaws. (1) Each circular hand-fed ripsaw shall be guarded by a hood which shall completely enclose that portion of the saw above the table and that portion of the saw above the material being cut. The hood and mounting shall be arranged so that the hood will automatically adjust itself to the thickness of and remain in contact with the material being cut but it shall not offer any considerable resistance to insertion of material to saw or to passage of the material being sawed. The hood shall be made of adequate strength to resist blows and strains incidental to reasonable operation, adjusting, and handling, and shall be so designed as to protect the operator from flying splinters and broken saw teeth. It shall be made of material that is soft enough so that it will be unlikely to cause tooth breakage. The hood shall be so mounted as to insure that its operation will be po

29 CFR 1910.213(c)(2)

(2) Each hand-fed circular ripsaw shall be furnished with a spreader to prevent material from squeezing the saw or being thrown back on the operator. The spreader shall be made of hard tempered steel, or its equivalent, and shall be thinner than the saw kerf. It shall be of sufficient width to provide adequate stiffness or rigidity to resist any reasonable side thrust or blow tending to bend or throw it out of position. The spreader shall be attached so that it will remain in true alignment with the saw even when either the saw or table is tilted. The provision of a spreader in connection with grooving, dadoing, or rabbeting is not required. On the completion of such operations, the spreader shall be immediately replaced.

29 CFR 1910.213(c)(3)

(3) Each hand-fed circular ripsaw shall be provided with nonkickback fingers or dogs so located as to oppose the thrust or tendency of the saw to pick up the material or to throw it back toward the operator. They shall be designed to provide adequate holding power for all the thicknesses of materials being cut.

Other sign manufacturing employers in Utah

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.