OSHA SearchOSHA records by employer

29 CFR 1910.332: Training

Subpart S—Electrical

920citations since 2015
877employers cited
88%serious, willful or repeat
$2,891median penalty per item

OSHA has cited 29 CFR 1910.332 920 times since 2015, against 877 employers. Penalties on these items add up to $3,864,364 at their current amounts.

Citations per year

The parts of the rule cited most

1910.332(b)(1) · 691 citations

(b) Content of training—(1) Practices addressed in this standard. Employees shall be trained in and familiar with the safety-related work practices required by §§ 1910.331 through 1910.335 that pertain to their respective job assignments.

1910.332(b)(2) · 160 citations

(2) Additional requirements for unqualified persons. Employees who are covered by paragraph (a) of this section but who are not qualified persons shall also be trained in and familiar with any electrically related safety practices not specifically addressed by §§ 1910.331 through 1910.335 but which are necessary for their safety.

1910.332(b)(3) · 39 citations

(3) Additional requirements for qualified persons. Qualified persons (i.e., those permitted to work on or near exposed energized parts) shall, at a minimum, be trained in and familiar with the following:

1910.332(b)(3)(i) · 8 citations

(i) The skills and techniques necessary to distinguish exposed live parts from other parts of electric equipment,

1910.332(c) · 7 citations

(c) Type of training. The training required by this section shall be of the classroom or on-the-job type. The degree of training provided shall be determined by the risk to the employee.

1910.332(a) · 5 citations

(a) Scope. The training requirements contained in this section apply to employees who face a risk of electric shock that is not reduced to a safe level by the electrical installation requirements of §§ 1910.303 through 1910.308.

1910.332(b)(3)(ii) · 5 citations

(ii) The skills and techniques necessary to determine the nominal voltage of exposed live parts, and

1910.332(b)(3)(iii) · 5 citations

(iii) The clearance distances specified in § 1910.333(c) and the corresponding voltages to which the qualified person will be exposed.

Industries cited most

  • Manufacturing 328
  • Administrative and Support and Waste Management and Remediation Services 125
  • Construction 78
  • Other Services (except Public Administration) 49
  • Wholesale Trade 45
  • Utilities 37

States cited most

Recently cited employers