OSHA SearchOSHA records by employer

29 CFR 1910.67: Vehicle-mounted elevating and rotating work platforms

Subpart F—Powered Platforms, Manlifts, and Vehicle-Mounted Work Platforms

1,728citations since 2015
1,451employers cited
93%serious, willful or repeat
$1,988median penalty per item

OSHA has cited 29 CFR 1910.67 1,728 times since 2015, against 1,451 employers. Penalties on these items add up to $4,555,727 at their current amounts.

Citations per year

The parts of the rule cited most

1910.67(c)(2)(v) · 1,286 citations

(v) A personal fall arrest or travel restraint system that meets the requirements in subpart I of this part shall be worn and attached to the boom or basket when working from an aerial lift.

1910.67(c)(2)(ii) · 228 citations

(ii) Only trained persons shall operate an aerial lift.

1910.67(c)(2)(iv) · 65 citations

(iv) Employees shall always stand firmly on the floor of the basket, and shall not sit or climb on the edge of the basket or use planks, ladders, or other devices for a work position.

1910.67(c)(2)(i) · 25 citations

(2) Extensible and articulating boom platforms. (i) Lift controls shall be tested each day prior to use to determine that such controls are in safe working condition.

1910.67(c)(2)(vii) · 21 citations

(vii) The brakes shall be set and outriggers, when used, shall be positioned on pads or a solid surface. Wheel chocks shall be installed before using an aerial lift on an incline.

1910.67(c)(2)(viii) · 21 citations

(viii) An aerial lift truck may not be moved when the boom is elevated in a working position with men in the basket, except for equipment which is specifically designed for this type of operation in accordance with the provisions of paragraphs (b)(1) and (b)(2) of this section.

1910.67(c)(3) · 19 citations

(3) Electrical tests. Electrical tests shall be made in conformance with the requirements of ANSI A92.2—1969, Section 5. However, equivalent DC voltage tests may be used in lieu of the AC voltage test specified in A92.2—1969. DC voltage tests which are approved by the equipment manufacturer or equivalent entity shall be considered an equivalent test for the purpose of this paragraph (c)(3).

1910.67(b)(2) · 16 citations

(2) Aerial lifts may be “field modified” for uses other than those intended by the manufacturer, provided the modification has been certified in writing by the manufacturer or by any other equivalent entity, such as a nationally recognized testing laboratory, to be in conformity with all applicable provisions of ANSI A92.2—1969 and this section, and to be at least as safe as the equipment was before modification.

Industries cited most

  • Administrative and Support and Waste Management and Remediation Services 603
  • Construction 419
  • Manufacturing 233
  • Professional, Scientific, and Technical Services 86
  • Information 62
  • Public Administration 45

States cited most

Recently cited employers