OSHA SearchOSHA records by employer

29 CFR 1917.118: Fixed ladders

Subpart F—Terminal Facilities

14citations since 2015
13employers cited
57%serious, willful or repeat
$5,210median penalty per item

OSHA has cited 29 CFR 1917.118 14 times since 2015, against 13 employers. Penalties on these items add up to $61,995 at their current amounts.

Citations per year

The parts of the rule cited most

1917.118(c)(1) · 4 citations

(c) Defects. (1) Ladders with broken, split or missing rungs, steps or rails, broken welds or connections, corrosion or wastage or other defect which may affect safe use shall be removed from service.

1917.118(e)(1) · 4 citations

(e) Protection against falls. (1) Fixed ladders more than 20 feet (6.1 m) in height shall be provided with a cage, well, or ladder safety device.

1917.118(d)(6) · 3 citations

(6) The side rails of ladders shall extend at least 36 inches (0.91 m) above the top landing surface, unless grab bars or equivalent holds are provided.

1917.118(e)(2)(ii) · 1 citations

(ii) Each section shall be horizontally offset from adjacent sections, except as specified in paragraph (e)(2)(iv) of this section, and

1917.118(e)(4)(i) · 1 citations

(i) Be installed and maintained in accordance with the manufacturer's instructions, which shall be available for inspection;

1917.118(f)(2) · 1 citations

(2) Form a continuous ladder, uniformly spaced vertically from 12 inches to 16 inches (30.5 to 40.6 cm) apart, with a minimum width of 10 inches (25.4 cm) and projecting at least 4 1/2 inches (11.43 cm) from the wall;

Industries cited most

  • Transportation and Warehousing 9
  • Wholesale Trade 5

States cited most