OSHA has cited 29 CFR 1926.1441 7 times since 2015, against 5 employers. Penalties on these items add up to $40,466 at their current amounts.
Citations per year
The parts of the rule cited most
1926.1441(c)(3)(ii) · 2 citations
(ii) Procedures applicable to the operation of the equipment, recommended operating speeds, special hazard warnings, instructions, and operator's manual are readily available for use by the operator.
1926.1441(c)(2)(i) · 1 citations
(i) When the manufacturer's procedures are unavailable, develop, and ensure compliance with, all procedures necessary for the safe operation of the equipment and attachments.
1926.1441(d)(1) · 1 citations
(d) Safety devices and operational aids. (1) The employer must ensure that safety devices and operational aids that are part of the original equipment are maintained in accordance with manufacturer procedures.
1926.1441(d)(2) · 1 citations
(2) Anti two-blocking. The employer must ensure that equipment covered by this section manufactured more than one year after November 8, 2010 have either an anti two-block device that meets the requirements of § 1926.1416(d)(3), or is designed so that, in the event of a two-block situation, no damage or load failure will occur (for example, by using a power unit that stalls in response to a two-block situation).
1926.1441(e) · 1 citations
(e) Operator qualifications. The employer must train each operator, prior to operating the equipment, on the safe operation of the type of equipment the operator will be using.
1926.1441(f) · 1 citations
(f) Signal person qualifications. The employer must train each signal person in the proper use of signals applicable to the use of the equipment.
Industries cited most
- Construction 5
- Manufacturing 2
States cited most
- Georgia 2
- New York 2
- Hawaii 1
- New Jersey 1
- Oklahoma 1