OSHA SearchOSHA records by employer

29 CFR 1926.305: Jacks—lever and ratchet, screw, and hydraulic

Subpart I—Tools—Hand and Power

20citations since 2015
17employers cited
55%serious, willful or repeat
$3,561median penalty per item

OSHA has cited 29 CFR 1926.305 20 times since 2015, against 17 employers. Penalties on these items add up to $80,583 at their current amounts.

Citations per year

The parts of the rule cited most

1926.305(c) · 6 citations

(c) Blocking. When it is necessary to provide a firm foundation, the base of the jack shall be blocked or cribbed. Where there is a possibility of slippage of the metal cap of the jack, a wood block shall be placed between the cap and the load.

1926.305(d)(1)(i) · 6 citations

(d)(1) Operation and maintenance. (i) After the load has been raised, it shall be cribbed, blocked, or otherwise secured at once.

1926.305(a)(1) · 4 citations

(a) General requirements. (1) The manufacturer's rated capacity shall be legibly marked on all jacks and shall not be exceeded.

1926.305(d)(1)(iii) · 1 citations

(iii) All jacks shall be properly lubricated at regular intervals.

1926.305(d)(1)(iv) · 1 citations

(iv) Each jack shall be thoroughly inspected at times which depend upon the service conditions. Inspections shall be not less frequent than the following:

1926.305(d)(1)(ivb) · 1 citations

(iv) Each jack shall be thoroughly inspected at times which depend upon the service conditions. Inspections shall be not less frequent than the following:

1926.305(d)(1)(vi) · 1 citations

(vi) Jacks which are out of order shall be tagged accordingly, and shall not be used until repairs are made.

Industries cited most

  • Construction 14
  • Transportation and Warehousing 2
  • Professional, Scientific, and Technical Services 2
  • Mining, Quarrying, and Oil and Gas Extraction 1
  • Retail Trade 1

States cited most

Recently cited employers