Since 2017, OSHA inspectors have visited 3D Idapro Solutions, LLC in Wisconsin 3 times.
The most recent inspection opened on Jul 11, 2018 after a complaint, in Wisconsin Rapids.
In all, OSHA issued 3 citation items: 2 serious and 1 other-than-serious.
The proposed penalties came to $20,787; today they stand at $14,551, 30% less.
Among manufacturing employers, the typical cited inspection since 2015 ends with a $4,875 penalty. 3D Idapro Solutions, LLC averages $7,275 across 2 cited inspections.
It reported 1 severe injury to OSHA since 2015.
Citation items per year, by inspection date.
Wisconsin · latest 90 days of OSHA records
229employers cited
Get notified the morning OSHA posts each new citation in Wisconsin: the employer, the site address, the rules broken and the penalty.
OSHA records show 3D Idapro Solutions, LLC at 2 sites in 2 states. Together they've had 8 inspections and $48,481 in current penalties.
We match records by employer name and industry, so these sites are likely the same company, not certainly. Franchises and subsidiaries can file under one name.
Included with any plan: the site-by-site record for all 2 sites, with repeat and willful violations and citations per year for the whole company. Already a subscriber? Sign in.
On January 22, 2017, an employee was driving a skid steer in an outdoor yard area where bulk materials are staged. At approximately 8:40 p.m., he exited the skid steer cab as a coworker was backing up an agricultural tractor/trailer. The employee was then struck by the tractor/trailer unit, fracturing several bones in his right foot.
The rules behind these citations
Current text from the Code of Federal Regulations. Some citations were issued under older wording.
(a) Machine guarding—(1) Types of guarding. One or more methods of machine guarding shall be provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks. Examples of guarding methods are—barrier guards, two-hand tripping devices, electronic safety devices, etc.
29 CFR 1910.303 · Electrical equipment, general requirements
29 CFR 1910.303(b)(2)
(2) Installation and use. Listed or labeled equipment shall be installed and used in accordance with any instructions included in the listing or labeling.
(e) Enclosures for damp or wet locations—(1) Cabinets, cutout boxes, fittings, boxes, and panelboard enclosures. Cabinets, cutout boxes, fittings, boxes, and panelboard enclosures in damp or wet locations shall be installed so as to prevent moisture or water from entering and accumulating within the enclosures and shall be mounted so there is at least 6.35-mm (0.25-in.) airspace between the enclosure and the wall or other supporting surface. However, nonmetallic enclosures may be installed without the airspace on a concrete, masonry, tile, or similar surface. The enclosures shall be weatherproof in wet locations.
Other dried and dehydrated food manufacturing employers in Wisconsin
Alert subscribers get notified of each newly cited employer in Wisconsin the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.