OSHA has inspected 84 Lumber Company 7 times in Texas since 2019.
The latest one began on Aug 12, 2024 on a referral, in Houston.
Those inspections ended with 18 citation items: 7 serious, 1 repeat and 10 other-than-serious.
Penalties were first proposed at $199,177 and now stand at $157,897, 21% lower after settlements or reviews.
Woodworking machinery comes up most often in these citations: 6 items under 1910.213.
How that compares: the median penalty per cited inspection for wholesale employers since 2015 is $3,425, and 84 Lumber Company averages $31,579 (5 cited inspections).
84 Lumber Company also files yearly injury logs with OSHA, summarized below.
It reported 5 severe injuries to OSHA since 2015.
Citation items per year, by inspection date.
Texas · latest 90 days of OSHA records
401employers cited
Get notified the morning OSHA posts each new citation in Texas: the employer, the site address, the rules broken and the penalty.
Incident on Feb 5, 2021: Employee amputates fingertips while repairing table saw moto
At 10:55 a.m. on February 5, 2021, an employee was going to begin repairs on the belt and pulley system of the table saw motor. The employee was struck by the fast-moving belt and amputated the tips of two fingers on the right hand. The employee was treated without hospitalization.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2024, the Houston site logged 3 recordable injuries or illnesses among about 63 workers: 4.2 per 100 full-time workers, against a median of 3.9 for its industry. Those cases cost 3 days away from work.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
1975
Houston · 2024
63
3
1
4.2
3.9
1938
San Antonio · 2022
41
1
0
1.9
3.5
1930
Duncanville · 2022
38
1
0
2.4
3.5
Severe injury reports
Employers must report any work-related amputation, in-patient hospitalization or loss of an eye to OSHA within 24 hours. 5 reports on file.
Aug 1, 2024, Houston: Hospitalization · effects of heat unspecified · body systems
An employee was operating a forklift in the yard and manually handling loads in the warehouse. The employee felt ill afterward and was hospitalized with a heat-related illness.
Feb 27, 2024, Houston: Hospitalization · fractures · lower leg(s)
An employee was pulling the bands from lumber when he lost balance and fell to the ground, landing on his right hip. He was hospitalized with a fractured right fibula.
Mar 7, 2023, Houston: Hospitalization, amputation · amputations · fingertip(s)
An employee was replacing forks on a forklift. As he was setting a fork in place, his left ring finger became caught between the fork and the mast. The employee went to pull his finger out and his fingertip was amputated; the injury required hospitalization.
An employee was about to begin repairs to the belt and pulley system of a table saw motor when the machine started and amputated two fingers on their right hand.
A stack of about 20 pieces of plywood fell on an employee's left leg, scraping the entire and landing on the left ankle. Both bones in the employee's lower leg were broken.
The rules behind these citations
Current text from the Code of Federal Regulations. Some citations were issued under older wording.
29 CFR 1910.132 · Personal protective equipment, general requirements
29 CFR 1910.132(f)(3)
(3) When the employer has reason to believe that any affected employee who has already been trained does not have the understanding and skill required by paragraph (f)(2) of this section, the employer shall retrain each such employee. Circumstances where retraining is required include, but are not limited to, situations where:
(4) Energy control procedure. (i) Procedures shall be developed, documented and utilized for the control of potentially hazardous energy when employees are engaged in the activities covered by this section.
29 CFR 1910.147(c)(7)(i)
(7) Training and communication. (i) The employer shall provide training to ensure that the purpose and function of the energy control program are understood by employees and that the knowledge and skills required for the safe application, usage, and removal of the energy controls are acquired by employees. The training shall include the following:
Alert subscribers get notified of each newly cited employer in Texas the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.