OSHA SearchOSHA records by employer

Aire Max Enterprises LLC: OSHA inspections and violations

Houston, Texas · Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance · NAICS 811310

1inspections
7citation items
$11,762current penalties
Jan 17, 2023last inspection

OSHA has inspected Aire Max Enterprises LLC once in Texas.

The inspection began on Jan 17, 2023 after a fatality or catastrophe, in Houston.

That inspection ended with 7 citation items: 5 serious and 2 other-than-serious.

Penalties were first proposed at $11,762 and still stand at $11,762.

Personal fall protection systems comes up most often in these citations: 4 items under 1910.140.

How that compares: the median penalty per cited inspection for repair and personal services employers since 2015 is $1,200, and Aire Max Enterprises LLC averages $11,762 (1 cited inspection).

1 inspection on this page followed a fatal incident.

Aire Max Enterprises LLC: OSHA citation items per year, 2023 to 2023
Citation items per year, by inspection date.

Texas · latest 90 days of OSHA records

391employers cited

5 of them in the same industry

Get notified the morning OSHA posts each new citation in Texas: the employer, the site address, the rules broken and the penalty.

See who gets cited next

Latest cited in Texas

Checking a subcontractor, a client or your own company? Watch Aire Max Enterprises LLC and get notified the morning OSHA posts a new citation for it.

Watch this company

Inspection history

Inspection 346441108 OPENED JAN 17, 2023Closed

Fatality or catastrophe · Partial · Safety · 2 employees at the site · Closed May 27, 2026

2035 Pech Road Unit G, Houston, TX 77055 · Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance · OSHA's record · Phone and website on Google Maps

Incident on Jan 13, 2023 (fatal): Employee dies after sustaining blunt force head injuries in

At 4:12 p.m. on January 13, 2023, an employee and a coworker were on the roof of a warehouse, perming refrigeration repair work. As the employee was exiting the roof to retrieve additional tools, he stepped and fell through a fiberglass skylight. No fall protection system was being utilized, and the employee fell approximately 18 feet to a concrete surface below. The employee sustained blunt force head trauma and was transported to the hospital, where he later died.

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
29 CFR 1910.28(b)(3)(i) · Fall protection in general industry
Serious$4,688$4,688Mar 21, 2023Final
Citation 1, item 2a
29 CFR 1910.140(c)(7) · Personal fall protection systems
Serious$3,349$3,349Mar 21, 2023Final
Citation 1, item 2b
29 CFR 1910.140(c)(8) · Personal fall protection systems
Serious$0$0Mar 21, 2023Final
Citation 1, item 2c
29 CFR 1910.140(c)(9) · Personal fall protection systems
Serious$0$0Mar 21, 2023Final
Citation 1, item 3
29 CFR 1910.140(d)(1)(i) · Personal fall protection systems
Serious$3,349$3,349Mar 21, 2023Final
Citation 2, item 1
29 CFR 1910.30(a)(2) · Training requirements
Other-than-serious$0$0Mar 21, 2023Final
Citation 2, item 2
29 CFR 1903.19(c)(1) · Proving cited hazards were fixed
Other-than-serious$376$376Sep 28, 2023Final

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1903.19 · Proving cited hazards were fixed

29 CFR 1903.19(c)(1)

(c) Abatement certification. (1) Within 10 calendar days after the abatement date, the employer must certify to OSHA (the Agency) that each cited violation has been abated, except as provided in paragraph (c)(2) of this section.

29 CFR 1910.140 · Personal fall protection systems

29 CFR 1910.140(c)(7)

(7) D-rings, snaphooks, and carabiners must be capable of sustaining a minimum tensile load of 5,000 pounds (22.2 kN).

29 CFR 1910.140(c)(8)

(8) D-rings, snaphooks, and carabiners must be proof tested to a minimum tensile load of 3,600 pounds (16 kN) without cracking, breaking, or incurring permanent deformation. The gate strength of snaphooks and carabiners must be capable of withstanding a minimum load of 3,600 pounds (16 kN) without the gate separating from the nose of the snaphook or carabiner body by more than 0.125 inches (3.175 mm).

29 CFR 1910.28 · Fall protection in general industry

29 CFR 1910.30 · Training requirements

Other commercial and industrial machinery and equipment (except automotive and electronic) repair and maintenance employers in Texas

Alert subscribers get notified of each newly cited employer in Texas the morning it is posted. See the alert plans.

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.