Alamo Structural Steel, LLC: OSHA inspections and violations
Waco, Texas · Fabricated Structural Metal Manufacturing · NAICS 332312
4inspections
8citation items
$45,613current penalties
Mar 6, 2025last inspection
Since 2019, OSHA inspectors have visited Alamo Structural Steel, LLC in Texas 4 times.
The most recent inspection opened on Mar 6, 2025 as a planned inspection, in Victoria and is still open.
In all, OSHA issued 8 citation items: 4 serious and 4 other-than-serious.
The proposed penalties came to $48,298; today they stand at $45,613, 6% less.
The rule cited most here is 1910.179 (overhead and gantry cranes), 2 times.
Among manufacturing employers, the typical cited inspection since 2015 ends with a $3,600 penalty. Alamo Structural Steel, LLC averages $11,403 across 4 cited inspections.
Alamo Structural Steel, LLC also files yearly injury logs with OSHA, summarized below.
It reported 2 severe injuries to OSHA since 2015.
Citation items per year, by inspection date.
Texas · latest 90 days of OSHA records
399employers cited
6 of them in the same industry
Get notified the morning OSHA posts each new citation in Texas: the employer, the site address, the rules broken and the penalty.
Checking a subcontractor, a client or your own company? Watch Alamo Structural Steel, LLC and get notified the morning OSHA posts a new citation for it.
Incident on Jan 8, 2021: Employee amputates pinky and lacerates ring finger while usi
At 10:45 a.m. on January 8, 2021, Employee #1, employed at a metal fabrication facility, was attempting to flip a square tube using a flipping tool. The weight of the tube was too heavy, causing it to bounce back towards the table at high pressure. The employee's left hand was caught in the process, resulting in the amputation of the first joint of the left pinky finger and a deep laceration to the left ring finger. The incident occurred during the handling of the tube with the flipping tool and table. The employee was hospitalized for treatment.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2022, the Waco site logged 3 recordable injuries or illnesses among about 85 workers: 3.9 per 100 full-time workers, against a median of 3.6 for its industry.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Alamo Structural Steel - Waco Plant
Waco · 2022
85
3
0
3.9
3.6
Alamo Structural Steel - Victoria Plant
Victoria · 2022
85
1
1
1.3
3.6
Alamo Structural Steel-Waco Plant
Waco · 2020
85
0
0
0.0
3.6
Alamo Structural Steel-Victoria Plant
Victoria · 2020
73
1
1
1.0
3.6
Alamo Structural Steel - Victoria Plant
Waco · 2020
60
1
1
1.0
3.6
Included with any plan: 7 more yearly logs from these sites, back to 2018, with each site's average rate over its latest three years. Already a subscriber? Sign in.
An employee was trying to flip a square steel tube using a flip bar. The tube did not flip all the way and came back down onto the employee's left pinky and ring fingers, crushing them against the edge of another steel tube. The employee's left pinky finger was amputated at the first joint and the ring finger was lacerated.
Jun 25, 2018, Victoria: Hospitalization · fractures · multiple body parts, n.e.c.
On June 25, 2018, an employee was pinching the metal pins (weighing about 25 pounds) out of an 18-wheeler flatbed truck, preparing the bed for a new load of steel I-beams. One of the pins caught his cloth causing him to lose balance; he fell to the concrete floor, breaking several ribs and his collarbone.
The rules behind these citations
Current text from the Code of Federal Regulations. Some citations were issued under older wording.
(6) Periodic inspection. (i) The employer shall conduct a periodic inspection of the energy control procedure at least annually to ensure that the procedure and the requirements of this standard are being followed.
(5) Rated load marking. The rated load of the crane shall be plainly marked on each side of the crane, and if the crane has more than one hoisting unit, each hoist shall have its rated load marked on it or its load block and this marking shall be clearly legible from the ground or floor.
29 CFR 1910.179(j)(3)
(3) Periodic inspection. Complete inspections of the crane shall be performed at intervals as generally defined in paragraph (j)(1)(ii)(b) of this section, depending upon its activity, severity of service, and environment, or as specifically indicated below. These inspections shall include the requirements of paragraph (j)(2) of this section and in addition, the following items. Any deficiencies such as listed shall be carefully examined and determination made as to whether they constitute a safety hazard:
Alert subscribers get notified of each newly cited employer in Texas the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.