Since 2025, OSHA inspectors have visited Alumanate LLC in Texas 2 times.
The most recent inspection opened on Jan 14, 2026 after a complaint, in Houston and is still open.
In all, OSHA issued 8 citation items: 4 serious and 4 other-than-serious.
The proposed penalties came to $32,628; today they stand at $19,577, 40% less.
The rule cited most here is 1910.303 (electrical equipment, general requirements), 2 times.
Among manufacturing employers, the typical cited inspection since 2015 ends with a $3,600 penalty. Alumanate LLC averages $9,788 across 2 cited inspections.
Want to know if OSHA cites Alumanate LLC again? Add it to a watchlist and we will email you the morning the citation shows up.
Watch this company842 Buschong Street, Houston, TX 77039 · Aluminum Sheet, Plate, and Foil Manufacturing · OSHA's record · Phone and website on Google Maps
| Citation and rule | Type | Proposed | Current | Issued | Status |
|---|---|---|---|---|---|
| Citation 1, item 1 29 CFR 1910.28(b)(6)(i) · Fall protection in general industry |
Serious | $11,585 | $6,951 | Jun 4, 2026 | Final |
| Citation 1, item 2 29 CFR 1910.219(f)(3) · Belts, pulleys and power-transmission parts |
Serious | $11,585 | $6,951 | Jun 4, 2026 | Final |
842 Buschong Street, Houston, TX 77039 · Aluminum Sheet, Plate, and Foil Manufacturing · OSHA's record · Phone and website on Google Maps
| Citation and rule | Type | Proposed | Current | Issued | Status |
|---|---|---|---|---|---|
| Citation 1, item 1 29 CFR 1910.178(p)(1) · Forklifts and other powered industrial trucks |
Serious | $4,729 | $2,837 | Jun 18, 2025 | Final |
| Citation 1, item 2 29 CFR 1910.179(j)(1)(ii) · Overhead and gantry cranes |
Serious | $4,729 | $2,837 | Jun 18, 2025 | Final |
| Citation 2, item 1 29 CFR 1910.37(a)(3) · Exit routes |
Other-than-serious | $0 | $0 | Jun 18, 2025 | Final |
| Citation 2, item 2 29 CFR 1910.303(f)(2) · Electrical equipment, general requirements |
Other-than-serious | $0 | $0 | Jun 18, 2025 | Final |
| Citation 2, item 3 29 CFR 1910.303(g)(1) · Electrical equipment, general requirements |
Other-than-serious | $0 | $0 | Jun 18, 2025 | Final |
| Citation 2, item 4 29 CFR 1910.305(b)(1)(ii) · Electrical wiring methods |
Other-than-serious | $0 | $0 | Jun 18, 2025 | Final |
Current text from the Code of Federal Regulations. Some citations were issued under older wording.
29 CFR 1910.178(p)(1)
(p) Operation of the truck. (1) If at any time a powered industrial truck is found to be in need of repair, defective, or in any way unsafe, the truck shall be taken out of service until it has been restored to safe operating condition.
29 CFR 1910.179(j)(1)(ii)
(ii) Inspection procedure for cranes in regular service is divided into two general classifications based upon the intervals at which inspection should be performed. The intervals in turn are dependent upon the nature of the critical components of the crane and the degree of their exposure to wear, deterioration, or malfunction. The two general classifications are herein designated as “frequent” and “periodic” with respective intervals between inspections as defined below:
29 CFR 1910.219(f)(3)
(3) Sprockets and chains. All sprocket wheels and chains shall be enclosed unless they are more than seven (7) feet above the floor or platform. Where the drive extends over other machine or working areas, protection against falling shall be provided. This subparagraph does not apply to manually operated sprockets.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.