OSHA SearchOSHA records by employer

American Apparel, Inc. Centre: OSHA inspections and violations

Centre, Alabama · Cut and Sew Apparel Contractors · NAICS 315211

1inspections
11citation items
$15,341current penalties
May 13, 2019last inspection

OSHA inspectors have visited American Apparel, Inc. Centre in Alabama one time.

It opened on May 13, 2019 as a planned inspection, in Centre.

In all, OSHA issued 11 citation items: 8 serious, 1 repeat and 2 other-than-serious.

The proposed penalties came to $25,569; today they stand at $15,341, 40% less.

The rule cited most here is 1910.303 (electrical equipment, general requirements), 3 times.

Among manufacturing employers, the typical cited inspection since 2015 ends with a $4,875 penalty. American Apparel, Inc. Centre averages $15,341 across 1 cited inspection.

The Wage and Hour Division has 1 case on it since 2015, with $0 in back wages owed to workers.

American Apparel, Inc. Centre: OSHA citation items per year, 2019 to 2019
Citation items per year, by inspection date.

Alabama · latest 90 days of OSHA records

99employers cited

Get notified the morning OSHA posts each new citation in Alabama: the employer, the site address, the rules broken and the penalty.

See who gets cited next

Latest cited in Alabama

Checking a subcontractor, a client or your own company? Watch American Apparel, Inc. Centre and get notified the morning OSHA posts a new citation for it.

Watch this company

Inspection history

Inspection 344022405 OPENED MAY 13, 2019Closed

Planned · Complete · Safety · 222 employees at the site · Closed Nov 6, 2019

800 Cedar Bluff Road, Centre, AL 35960 · Cut and Sew Apparel Contractors · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
29 CFR 1910.147(c)(1) · Lockout/tagout
Serious$6,819$4,091Sep 26, 2019Final
Citation 1, item 2a
29 CFR 1910.212(a)(1) · Machine guarding
Serious$6,819$4,091Sep 26, 2019Final
Citation 1, item 2b
29 CFR 1910.212(a)(3)(ii) · Machine guarding
Serious$0$0Sep 26, 2019Final
Citation 1, item 2c
29 CFR 1910.219(f)(3) · Belts, pulleys and power-transmission parts
Serious$0$0Sep 26, 2019Final
Citation 1, item 3a
29 CFR 1910.219(c)(4)(i) · Belts, pulleys and power-transmission parts
Serious$5,115$3,069Sep 26, 2019Final
Citation 1, item 3b
29 CFR 1910.219(a)(3) · Belts, pulleys and power-transmission parts
Serious$0$0Sep 26, 2019Final
Citation 1, item 4a
29 CFR 1910.303(b)(2) · Electrical equipment, general requirements
Serious$5,115$3,069Sep 26, 2019Final
Citation 1, item 4b
29 CFR 1910.303(b)(7)(i) · Electrical equipment, general requirements
Serious$0$0Sep 26, 2019Final
Citation 2, item 1
29 CFR 1910.37(b)(4) · Exit routes
Repeat$1,701$1,021Sep 26, 2019Final
Citation 3, item 1
29 CFR 1910.36(h)(3) · Exit route design
Other-than-serious$0$0Sep 26, 2019Final
Citation 3, item 2
29 CFR 1910.303(g)(1)(ii) · Electrical equipment, general requirements
Other-than-serious$0$0Sep 26, 2019Final

Wage and hour cases

Cases by the Labor Department's Wage and Hour Division since 2015: unpaid minimum wage or overtime, child labor, family leave and more.

Period reviewedViolationsWorkers owedBack wagesPenalties
Jan 23, 2024 to Jan 21, 2026
CENTRE
30$0$0

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1910.147 · Lockout/tagout

29 CFR 1910.147(c)(1)

(c) General—(1) Energy control program. The employer shall establish a program consisting of energy control procedures, employee training and periodic inspections to ensure that before any employee performs any servicing or maintenance on a machine or equipment where the unexpected energizing, start up or release of stored energy could occur and cause injury, the machine or equipment shall be isolated from the energy source, and rendered inoperative.

29 CFR 1910.212 · Machine guarding

29 CFR 1910.212(a)(1)

(a) Machine guarding—(1) Types of guarding. One or more methods of machine guarding shall be provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks. Examples of guarding methods are—barrier guards, two-hand tripping devices, electronic safety devices, etc.

29 CFR 1910.212(a)(3)(ii)

(ii) The point of operation of machines whose operation exposes an employee to injury, shall be guarded. The guarding device shall be in conformity with any appropriate standards therefor, or, in the absence of applicable specific standards, shall be so designed and constructed as to prevent the operator from having any part of his body in the danger zone during the operating cycle.

29 CFR 1910.219 · Belts, pulleys and power-transmission parts

29 CFR 1910.303 · Electrical equipment, general requirements

29 CFR 1910.36 · Exit route design

29 CFR 1910.37 · Exit routes

Other cut and sew apparel contractors employers in Alabama

Alert subscribers get notified of each newly cited employer in Alabama the morning it is posted. See the alert plans.

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.