OSHA SearchOSHA records by employer

American Custom Modular, LLC.: OSHA inspections and violations

Millville, New Jersey · Prefabricated Wood Building Manufacturing · NAICS 321992

1inspections
10citation items
$15,300current penalties
Jan 21, 2015last inspection

OSHA has inspected American Custom Modular, LLC. once in New Jersey.

The inspection began on Jan 21, 2015 after a complaint, in Millville.

That inspection ended with 10 citation items: 9 serious and 1 other-than-serious.

Penalties were first proposed at $39,300 and now stand at $15,300, 61% lower after settlements or reviews.

Using electrical equipment comes up most often in these citations: 2 items under 1910.334.

How that compares: the median penalty per cited inspection for manufacturing employers since 2015 is $4,500, and American Custom Modular, LLC. averages $15,300 (1 cited inspection).

It reported 1 severe injury to OSHA since 2015.

The Wage and Hour Division has 1 case on it since 2015, with $71,747 in back wages owed to workers.

American Custom Modular, LLC.: OSHA citation items per year, 2015 to 2015
Citation items per year, by inspection date.

New Jersey · latest 90 days of OSHA records

269employers cited

Get notified the morning OSHA posts each new citation in New Jersey: the employer, the site address, the rules broken and the penalty.

See who gets cited next

Latest cited in New Jersey

Checking a subcontractor, a client or your own company? Watch American Custom Modular, LLC. and get notified the morning OSHA posts a new citation for it.

Watch this company

Inspection history

Inspection 340199207 OPENED JAN 21, 2015Closed

Complaint · Complete · Safety · 40 employees at the site · Closed Jun 8, 2016

301 Riverside Drive, Millville, NJ 08332 · Prefabricated Wood Building Manufacturing · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
29 CFR 1910.23(c)(1) · Guarding floor and wall openings and holes
Serious$4,900$2,940Jun 9, 2015Final
Citation 1, item 2
29 CFR 1910.179(h)(2)(v) · Overhead and gantry cranes
Serious$4,900$2,940Jun 9, 2015Final
Citation 1, item 3a Serious$4,900$2,940Jun 9, 2015Final
Citation 1, item 3b Serious$4,900$0Jun 9, 2015Final
Citation 1, item 5
29 CFR 1910.213(c)(1) · Woodworking machinery
Serious$4,900$2,940Jun 9, 2015Final
Citation 1, item 6a
29 CFR 1910.303(b)(1) · Electrical equipment, general requirements
Serious$4,900$2,940Jun 9, 2015Final
Citation 1, item 6b
29 CFR 1910.303(f)(2) · Electrical equipment, general requirements
Serious$0$0Jun 9, 2015Final
Citation 1, item 6c
29 CFR 1910.334(a)(2)(i) · Using electrical equipment
Serious$4,900$0Jun 9, 2015Final
Citation 1, item 6d
29 CFR 1910.334(a)(2)(ii) · Using electrical equipment
Serious$0$0Jun 9, 2015Final
Citation 2, item 1
29 CFR 1904.39(a) · Reporting deaths and severe injuries
Other-than-serious$5,000$600Jun 9, 2015Final

Severe injury reports

Employers must report any work-related amputation, in-patient hospitalization or loss of an eye to OSHA within 24 hours. 1 report on file.

Mar 25, 2015, Millville: Hospitalization · puncture wounds, except gunshot wounds · finger(s), fingernail(s), unspecified

Employee shot a nail from a nail gun into his left thumb.

Wage and hour cases

Cases by the Labor Department's Wage and Hour Division since 2015: unpaid minimum wage or overtime, child labor, family leave and more.

Period reviewedViolationsWorkers owedBack wagesPenalties
Nov 1, 2014 to Nov 30, 2015
Millville
3111$71,747$0

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1904.39 · Reporting deaths and severe injuries

29 CFR 1910.179 · Overhead and gantry cranes

29 CFR 1910.184 · Slings

29 CFR 1910.184(c)(7)

(7) Slings shall be padded or protected from the sharp edges of their loads.

29 CFR 1910.184(d)

(d) Inspections. Each day before being used, the sling and all fastenings and attachments shall be inspected for damage or defects by a competent person designated by the employer. Additional inspections shall be performed during sling use, where service conditions warrant. Damaged or defective slings shall be immediately removed from service.

29 CFR 1910.213 · Woodworking machinery

29 CFR 1910.213(c)(1)

(c) Hand-fed ripsaws. (1) Each circular hand-fed ripsaw shall be guarded by a hood which shall completely enclose that portion of the saw above the table and that portion of the saw above the material being cut. The hood and mounting shall be arranged so that the hood will automatically adjust itself to the thickness of and remain in contact with the material being cut but it shall not offer any considerable resistance to insertion of material to saw or to passage of the material being sawed. The hood shall be made of adequate strength to resist blows and strains incidental to reasonable operation, adjusting, and handling, and shall be so designed as to protect the operator from flying splinters and broken saw teeth. It shall be made of material that is soft enough so that it will be unlikely to cause tooth breakage. The hood shall be so mounted as to insure that its operation will be po

29 CFR 1910.23 · Guarding floor and wall openings and holes

29 CFR 1910.303 · Electrical equipment, general requirements

29 CFR 1910.334 · Using electrical equipment

Other prefabricated wood building manufacturing employers in New Jersey

Alert subscribers get notified of each newly cited employer in New Jersey the morning it is posted. See the alert plans.

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.