OSHA SearchOSHA records by employer

Amfan Corporation: OSHA inspections and violations

Dallas, Texas · Machine Shops · NAICS 332710

2inspections
3citation items
$6,650current penalties
May 19, 2016last inspection

Since 2016, OSHA inspectors have visited Amfan Corporation in Texas 2 times.

The most recent inspection opened on May 19, 2016 on a referral, in Dallas.

In all, OSHA issued 3 citation items: 1 serious and 2 other-than-serious.

The proposed penalties came to $12,230; today they stand at $6,650, 46% less.

Among manufacturing employers, the typical cited inspection since 2015 ends with a $3,600 penalty. Amfan Corporation averages $3,325 across 2 cited inspections.

Amfan Corporation: OSHA citation items per year, 2016 to 2016
Citation items per year, by inspection date.

Texas · latest 90 days of OSHA records

401employers cited

5 of them in the same industry

Get notified the morning OSHA posts each new citation in Texas: the employer, the site address, the rules broken and the penalty.

See who gets cited next

Latest cited in Texas

Checking a subcontractor, a client or your own company? Watch Amfan Corporation and get notified the morning OSHA posts a new citation for it.

Watch this company

Inspection history

Inspection 341489581 OPENED MAY 19, 2016Closed

Referral · Partial · Health · 49 employees at the site · Closed Aug 16, 2016

3443 Morse Drive, Dallas, TX 75236 · Machine Shops · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1 Other-than-serious$3,500$2,750Jul 26, 2016Final

Inspection 341410272 OPENED APR 19, 2016Closed

Complaint · Partial · Safety · 49 employees at the site · Closed Oct 6, 2016

3443 Morse Drive, Dallas, TX 75236 · Machine Shops · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1a
29 CFR 1910.212(a)(3)(ii) · Machine guarding
Serious$8,730$3,900Sep 8, 2016Final
Citation 1, item 1b
29 CFR 1910.219(c)(2)(i) · Belts, pulleys and power-transmission parts
Other-than-serious$0$0Sep 8, 2016Final

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1910.212 · Machine guarding

29 CFR 1910.212(a)(3)(ii)

(ii) The point of operation of machines whose operation exposes an employee to injury, shall be guarded. The guarding device shall be in conformity with any appropriate standards therefor, or, in the absence of applicable specific standards, shall be so designed and constructed as to prevent the operator from having any part of his body in the danger zone during the operating cycle.

29 CFR 1910.219 · Belts, pulleys and power-transmission parts

29 CFR 1910.219(c)(2)(i)

(2) Guarding horizontal shafting. (i) All exposed parts of horizontal shafting seven (7) feet or less from floor or working platform, excepting runways used exclusively for oiling, or running adjustments, shall be protected by a stationary casing enclosing shafting completely or by a trough enclosing sides and top or sides and bottom of shafting as location requires.

29 CFR 1910.95 · Noise

29 CFR 1910.95(c)(1)

(c) Hearing conservation program. (1) The employer shall administer a continuing, effective hearing conservation program, as described in paragraphs (c) through (o) of this section, whenever employee noise exposures equal or exceed an 8-hour time-weighted average sound level (TWA) of 85 decibels measured on the A scale (slow response) or, equivalently, a dose of fifty percent. For purposes of the hearing conservation program, employee noise exposures shall be computed in accordance with appendix A and Table G-16a, and without regard to any attenuation provided by the use of personal protective equipment.

Other machine shops employers in Texas

Alert subscribers get notified of each newly cited employer in Texas the morning it is posted. See the alert plans.

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.