OSHA SearchOSHA records by employer

Anchor Machine & Fabricating, Inc.: OSHA inspections and violations

Tampa, Florida · Machine Shops · NAICS 332710

1inspections
4citation items
$3,252current penalties
Oct 15, 2015last inspection

OSHA inspectors have visited Anchor Machine & Fabricating, Inc. in Florida one time.

It opened on Oct 15, 2015 as a planned inspection, in Tampa.

In all, OSHA issued 4 citation items: 3 serious and 1 other-than-serious.

The proposed penalties came to $5,420; today they stand at $3,252, 40% less.

The rule cited most here is 1910.215 (grinders and abrasive wheels), 2 times.

Among manufacturing employers, the typical cited inspection since 2015 ends with a $3,600 penalty. Anchor Machine & Fabricating, Inc. averages $3,252 across 1 cited inspection.

Anchor Machine & Fabricating, Inc.: OSHA citation items per year, 2015 to 2015
Citation items per year, by inspection date.

Florida · latest 90 days of OSHA records

321employers cited

5 of them in the same industry

Get notified the morning OSHA posts each new citation in Florida: the employer, the site address, the rules broken and the penalty.

See who gets cited next

Latest cited in Florida

Checking a subcontractor, a client or your own company? Watch Anchor Machine & Fabricating, Inc. and get notified the morning OSHA posts a new citation for it.

Watch this company

Inspection history

Inspection 340986504 OPENED OCT 15, 2015Closed

Planned · Partial · Safety · 12 employees at the site · Closed Dec 8, 2015

3905 East 7th Ave., Tampa, FL 33605 · Machine Shops · OSHA's record · Phone and website on Google Maps

Citation and ruleTypeProposedCurrentIssuedStatus
Citation 1, item 1
29 CFR 1910.212(a)(1) · Machine guarding
Serious$2,400$1,440Nov 9, 2015Final
Citation 1, item 2
29 CFR 1910.215(a)(4) · Grinders and abrasive wheels
Serious$1,020$612Nov 9, 2015Final
Citation 1, item 3
29 CFR 1910.215(b)(9) · Grinders and abrasive wheels
Serious$2,000$1,200Nov 9, 2015Final
Citation 2, item 1
29 CFR 1910.132(d)(2) · Personal protective equipment, general requirements
Other-than-serious$0$0Nov 9, 2015Final

The rules behind these citations

Current text from the Code of Federal Regulations. Some citations were issued under older wording.

29 CFR 1910.132 · Personal protective equipment, general requirements

29 CFR 1910.132(d)(2)

(2) The employer shall verify that the required workplace hazard assessment has been performed through a written certification that identifies the workplace evaluated; the person certifying that the evaluation has been performed; the date(s) of the hazard assessment; and, which identifies the document as a certification of hazard assessment.

29 CFR 1910.212 · Machine guarding

29 CFR 1910.212(a)(1)

(a) Machine guarding—(1) Types of guarding. One or more methods of machine guarding shall be provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks. Examples of guarding methods are—barrier guards, two-hand tripping devices, electronic safety devices, etc.

29 CFR 1910.215 · Grinders and abrasive wheels

29 CFR 1910.215(a)(4)

(4) Work rests. On offhand grinding machines, work rests shall be used to support the work. They shall be of rigid construction and designed to be adjustable to compensate for wheel wear. Work rests shall be kept adjusted closely to the wheel with a maximum opening of one-eighth inch to prevent the work from being jammed between the wheel and the rest, which may cause wheel breakage. The work rest shall be securely clamped after each adjustment. The adjustment shall not be made with the wheel in motion.

Other machine shops employers in Florida

Alert subscribers get notified of each newly cited employer in Florida the morning it is posted. See the alert plans.

Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.