The inspection began on Mar 17, 2021 as a planned inspection, in Omaha.
That inspection ended with 6 citation items: 6 serious.
Penalties were first proposed at $43,273 and now stand at $30,000, 31% lower after settlements or reviews.
Belts, pulleys and power-transmission parts comes up most often in these citations: 2 items under 1910.219.
How that compares: the median penalty per cited inspection for manufacturing employers since 2015 is $4,875, and Ardent Mills averages $30,000 (1 cited inspection).
Ardent Mills also files yearly injury logs with OSHA, summarized below.
Citation items per year, by inspection date.
Nebraska · latest 90 days of OSHA records
31employers cited
Get notified the morning OSHA posts each new citation in Nebraska: the employer, the site address, the rules broken and the penalty.
OSHA records show Ardent Mills at 14 sites in 10 states. Together they've had 26 inspections and $235,122 in current penalties.
We match records by employer name and industry, so these sites are likely the same company, not certainly. Franchises and subsidiaries can file under one name.
Included with any plan: the site-by-site record for all 14 sites, with repeat and willful violations and citations per year for the whole company. Already a subscriber? Sign in.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2025, the Omaha site logged 3 recordable injuries or illnesses among about 57 workers: 4.6 per 100 full-time workers, against a median of 2.1 for its industry. Those cases cost 22 days away from work.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
Ardent Mills Omaha B
Omaha · 2025
57
3
3
4.6
2.1
Ardent Mills Omaha A
Omaha · 2025
34
0
0
0.0
2.1
Ardent Mills Omaha Office
Omaha · 2025
8
0
0
0.0
0.0
Ardent Mills Omaha South
Omaha · 2020
40
1
0
2.0
2.1
Ardent Mills Omaha North
Omaha · 2020
20
0
0
0.0
2.1
Included with any plan: 2 more yearly logs from these sites, back to 2020, with each site's average rate over its latest three years. Already a subscriber? Sign in.
(a) Machine guarding—(1) Types of guarding. One or more methods of machine guarding shall be provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks. Examples of guarding methods are—barrier guards, two-hand tripping devices, electronic safety devices, etc.
29 CFR 1910.219 · Belts, pulleys and power-transmission parts
29 CFR 1910.219(d)(1)
(d) Pulleys—(1) Guarding. Pulleys, any parts of which are seven (7) feet or less from the floor or working platform, shall be guarded in accordance with the standards specified in paragraphs (m) and (o) of this section. Pulleys serving as balance wheels (e.g., punch presses) on which the point of contact between belt and pulley is more than six feet six inches (6 ft. 6 in.) from the floor or platform may be guarded with a disk covering the spokes.
29 CFR 1910.219(e)(1)(i)
(e) Belt, rope, and chain drives—(1) Horizontal belts and ropes. (i) Where both runs of horizontal belts are seven (7) feet or less from the floor level, the guard shall extend to at least fifteen (15) inches above the belt or to a standard height except that where both runs of a horizontal belt are 42 inches or less from the floor, the belt shall be fully enclosed in accordance with paragraphs (m) and (o) of this section.
Alert subscribers get notified of each newly cited employer in Nebraska the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.