Automated Packaging Systems, Inc: OSHA inspections and violations
Bedford, Ohio · Plastics Bag and Pouch Manufacturing · NAICS 326111
9inspections
47citation items
$47,312current penalties
Aug 23, 2017last inspection
Since 1985, OSHA inspectors have visited Automated Packaging Systems, Inc in Ohio 9 times.
The most recent inspection opened on Aug 23, 2017 on a referral, in Bedford.
In all, OSHA issued 47 citation items: 29 serious and 18 other-than-serious.
The proposed penalties came to $80,777; today they stand at $47,312, 41% less.
The rule cited most here is 1910.212 (machine guarding), 11 times.
Among manufacturing employers, the typical cited inspection since 2015 ends with a $4,500 penalty. Automated Packaging Systems, Inc averages $6,196 across 2 cited inspections.
Automated Packaging Systems, Inc also files yearly injury logs with OSHA, summarized below.
It reported 2 severe injuries to OSHA since 2015.
Citation items per year, by inspection date.
Ohio · latest 90 days of OSHA records
267employers cited
Get notified the morning OSHA posts each new citation in Ohio: the employer, the site address, the rules broken and the penalty.
Checking a subcontractor, a client or your own company? Watch Automated Packaging Systems, Inc and get notified the morning OSHA posts a new citation for it.
Incident on Aug 15, 2017: Employee slides finger past motor guard and amputates finger
At 4:00 p.m. on August 15, 2017, an employee placed a roll of tape on a motor. The employee reached for the tape roll and got his left pinky finger past the motor guard and amputated the tip of the finger when it was struck by the motor. Hospitalization was not required.
From the Form 300A summaries employers file with OSHA each year. Rate = recordable cases per 100 full-time workers.
In 2020, the Bedford Heights site logged 7 recordable injuries or illnesses among about 155 workers: 4.3 per 100 full-time workers, against a median of 2.6 for its industry. Those cases cost 14 days away from work.
Site and year
Workers
Cases
Days-away cases
Rate
Industry median
APS Bedford
Bedford Heights · 2020
155
7
3
4.3
2.6
APS Streetsboro Corp
Streetsboro · 2020
144
0
0
0.0
1.9
APS Streetsboro SPO
Streetsboro · 2020
144
2
1
1.5
2.6
APS Corp CSC
Streetsboro · 2020
35
2
0
5.5
1.9
APS Streetsboro Corp Machinery
Streetsboro · 2019
240
3
1
1.1
2.6
APS Streetsboro Plant
Streetsboro · 2019
199
2
0
1.0
2.6
APS Bedford Heights
Bedford Heights · 2019
149
2
2
1.2
2.6
Included with any plan: 12 more yearly logs from these sites, back to 2016, with each site's average rate over its latest three years. Already a subscriber? Sign in.
An employee was reaching for a roll of tape on a blower motor when the employee's left pinky finger was caught and amputated between the blower motor guard.
An employee was setting up the machine in the converting department when his hand got caught in the nip roller crushing his hand. The employee was admitted to the hospital for surgery to repair the injured hand.
The rules behind these citations
Current text from the Code of Federal Regulations. Some citations were issued under older wording.
29 CFR 1904.2 · Partial exemption for establishments in certain industries
(iv) Handling liquids at point of final use. (a) Category 1 or 2 flammable liquids, or Category 3 flammable liquids with a flashpoint below 100 °F (37.8 °C), shall be kept in covered containers when not actually in use.
29 CFR 1910.106(e)(6)(ii)
(ii) Grounding. Category 1 or 2 flammable liquids, or Category 3 flammable liquids with a flashpoint below 100 °F (37.8 °C), shall not be dispensed into containers unless the nozzle and container are electrically interconnected. Where the metallic floorplate on which the container stands while filling is electrically connected to the fill stem or where the fill stem is bonded to the container during filling operations by means of a bond wire, the provisions of this section shall be deemed to have been complied with.
(i) The spraying operations except electrostatic spraying operations shall be so designed, installed and maintained that the average air velocity over the open face of the booth (or booth cross section during spraying operations) shall be not less than 100 linear feet per minute. Electrostatic spraying operations may be conducted with an air velocity over the open face of the booth of not less than 60 linear feet per minute, or more, depending on the volume of the finishing material being applied and its flammability and explosion characteristics. Visible gauges or audible alarm or pressure activated devices shall be installed to indicate or insure that the required air velocity is maintained. Filter rolls shall be inspected to insure proper replacement of filter media.
Alert subscribers get notified of each newly cited employer in Ohio the morning it is posted. See the alert plans.
Source: U.S. Department of Labor, OSHA enforcement data. A citation is OSHA's allegation; employers can contest it, and the status column shows where each item stands. Something wrong on this page? Tell us.